Skip to main content

Road Markings, Barriers & Workzone Protection

New barrier, crash cushion and access control technology will benefit road user safety
October 26, 2012
Protecting road users, with barriers, crash cushions or access control systems, is crucial for network safety - Mike Woof writes Tough regulations are now in place in Europe and the US, requiring road authorities to provide safer road infrastructure than in the past. Technologies to reduce the severity of vehicle impacts against obstructions or redirect vehicles into the roadway should help cut injuries amongst drivers and passengers alike. The specifications for the use of crash cushions and barriers can v
New approach needed in Europe to help improve motorcycle safety
August 22, 2012
The European Commission is proposing that part of its controversial new Anti-Tampering regulations for motorcycles should be re-written to prevent custom motorcycle builders from using long-forks. This is the latest in a series of requirements in the regulations to attracted criticisms from motorcycle manufacturers, dealers, safety campaigners and enthusiasts groups.
Be seen, be safe
August 2, 2012
Avery Dennison is offering the Omni-Brite S-9000, a flexible microprismatic material designed for use on safety vests and other garments. The company, which has a range of omni-directional reflective work zone sign sheeting and pre-striped barricade reflective sheeting for optimal visibility in hazardous work zone areas, says its Omni-Brite S-9000 offers high levels of reflectivity no matter which way work zone workers move, even in wet weather conditions. The product has been certified to meet or exceed ma
Call for bike safe barriers
July 31, 2012
The Institute of Advanced Motorists (IAM) in the UK is calling on the government to redesign crash barriers to make them more motorcycle-friendly. While crash barriers have saved the lives of thousands of drivers, hitting a crash barrier is a factor in eight to sixteen per cent of rider deaths. When they hit a crash barrier, riders are 15 times more likely to be killed than car occupants. In a crash, barrier support posts can worsen injuries by five times.
Quieter roads
July 20, 2012
Sound absorption systems can cut traffic noise With traffic volumes increasing worldwide and highways having to be redesigned to minimise their impact on the environment, the industry has had to come up with new solutions that reduce the impact of roads. Highway noise is a major issue both in urban and non-urban locations so engineers have been busy developing innovative solutions that can help alleviate this problem. Durability and effective noise dampening properties are claimed for the new All Weather So
When the rain comes
July 18, 2012
Statistics show that wet weather and the dark is not the best mix for driving, but road markings offer a safety solution While good road markings are essential any time of the day, it is perhaps at night when roads are wet that they can offer extra guidance. Statistics are said to reveal that an estimated 50% of all accidents happen during the night when it rains but such conditions occur only 10% of the time and when there are usually less vehicles on the road. Indeed, at the 1st Road Marking Symposium hel
World launch for MDL's 'super' sensor
July 17, 2012
A new series of miniature, high accuracy laser-based range and velocity measurement sensors could soon be used on police vehicles to check speeding motorists. There are many other applications for the RVMS Range and Velocity Measurement System from Measurement Devices (MDL). Evaluation models will be available soon.
Concrete barriers help to minimise accidents
July 12, 2012
Concrete barriers offer a highway safety solution - Mike Woof writes. Concrete safety barriers are being installed on many of Europe's major highways, particularly for use as centre lane dividers. The strength and durability of concrete barriers can help reduce the risk of cross over accidents, one of several topics raised at a conference in Brussels on concrete highway barriers organised by the European Concrete Paving Association, EUPAVE. The conference was opened by Yves Deceoene of the IRF's Belgian ex
IRF calls for action on road traffic noise
July 12, 2012
IRF BPC calls for more effective implementation of Noise Reduction Maps According to the European Union Directive 2002/49/EC relating to the assessment and management of environmental noise (END), the Member States of the European Union have committed to abide by a strict timetable of milestones and deliverables, all aimed at reducing current levels of noise and improving the life of Europe's citizens. As part of this overall strategy, European leaders were required to submit national noise action plans by
Increased functionality in road marking machines
July 12, 2012
Borum Industri's BM350-2 and BM500-2 road marking machines, introduced more than three years ago, represented a major improvement in function and reliability for customers, says the company. While feedback from customers and Borum's own service and after sales department shows the machines have performed very well, suggestions from customers offered ideas for further improvements.