Products

Sophisticated new rotating lasers from Topcon
July 10, 2018
Topcon Positioning Group is expanding its RL-H line of self-leveling rotating lasers. The RL-H5 series is said to be designed for high-accuracy and long working range in laser applications for grading, excavating and general construction projects. The new offering includes instruments to support diverse job site demands. The firm says that the RL-H5 series can be used for an array of tasks including machine guidance, checking grade, setting foundations and footings, checking excavations for pools, patios,
Read More
Aggregate Industries moves plant to Inverness city centre
July 10, 2018
Aggregate Industries said that its new plant in the centre of Inverness, Scotland, provides warm mix asphalt to allow surfacing contractors to extend their range of products. AI, which relocated its asphalt plant in Daviot to Inverness, said that the new location makes it faster for customers to access the plant by offering 24-hour service by request. Also, customers are less likely to be affected by adverse weather conditions as previously experienced in Daviot.
Read More
Texo flying high in the UK with a Topcon Falcon 8+ UAV
July 3, 2018
Texo Drone Survey and Inspection says that it is the first company in the UK to fly the Falcon 8+ UAV system from Topcon. The multicamera payload Topcon Falcon 8+ is the third-generation edition of the Falcon Drone system that was introduced in 2009 for aerial imaging, monitoring and mapping. The Topcon Falcon 8+ needs minimal pilot corrections while its GCS includes built-in automated flight functions. There is also advanced flight planning thanks to the Intel Cockpit Controller.
Read More
Trakm8 signs telematics contract with Colas’s Czech operations
July 3, 2018
The Czech division of French civil engineering group Colas will install Trakm8 vehicle use and GPS tracking systems on at least 1,000 vehicles and machines. Installation of the telematics will take place over three years in an effort to improve day-to-day management of its assets and reducing fuel consumption. Colas will hook up cars and construction machinery such as excavators, cranes and asphalt pavers so data is collected on GPS positions within certain sites, hourly utilisation reports and fuel
Read More
Concrete protection from chloride attack
July 3, 2018
Independent testing carried out at the VINCI Construction Technology Centre has now confirmed that Flexcrete’s Cementitious Coating 851 will provide an effective barrier to chlorides for at least 29 years. In 1988, a 2mm thick film of Cementitious Coating 851 was applied to a concrete slice and sealed in a chloride ion diffusion cell and it is still going strong some 29 years (10,586 days) later. Ongoing tests carried out in the VINCI Construction Technology Centre laboratory show that the barrier properti
Read More
DoosanCONNECT to be more widely available in Europe
July 3, 2018
Doosan Infracore Construction Equipment has announced that its DoosanCONNECT fleet and asset management system will be more widely available in Europe. It now covers around 60,000 of the company’s excavators, wheeled loaders and articulated dump trucks worldwide. Doosan plans to expand the types of equipment covered by DoosanCONNECT and develop various services based on the telematics system to manage consumables and provide enhanced maintenance packages.
Read More
Business confidence in construction
June 29, 2018
Business confidence is strong in the global construction equipment market at present. Manufacturers of machines around the world, as well as component suppliers, are all reporting strong financial performance, with healthy sales and order books. Many manufacturers including Deutz, Komatsu, Manitou, Volvo CE and Wacker Neuson have announced robust financial results recently, with many seeing record levels of sales and turnover. Firms in China, Europe, Japan, South Korea and the US all report good levels of
Read More
Roo'd Awakening and BMW Drivers
June 29, 2018
A rider amongst a group of cyclists on a training run in Australia had a rather unpleasant experience. The man was cycling along a road with his team mates when a young kangaroo jumped out from the road side and collided with him, knocking him from his bicycle. Although he was riding at speed at the time, he was not seriously hurt and as one of his team mates filmed the incident, will have video footage to better remember the incident by. The feelings of the kangaroo over the incident were not recorded.
Read More
Solar lighting trial for road construction
June 28, 2018
Successful trials have been carried out of mobile solar lighting for road construction activities. The mobile solar-powered lighting is said to offer cost savings for highways contractors and trials of the Prolectric ProLight have demonstrated its carbon and air quality benefits as an alternative to temporary diesel lighting towers. The technology has been pioneered by Prolectric to deliver year-round solar lighting and optimise winter performance. Temporary lighting frequently has to be deployed in heavi
Read More
Volvo CE machines boost output for US quarry
June 28, 2018
At Savage Stone’s 161.9ha quarry in Jessup, Maryland, gabbro is extracted from five 13.1m-tall benches, with chemical rock hardness increasing with each lower level. The shot rock (similar to granite and good for coarse road base) used to be loaded into Volvo 31tonne and 36tonne capacity articulated haulers and 90tonne capacity Euclid rigid haulers and transported 800m uphill to the primary crusher, a Lippmann 5062 jaw crusher. The jaw crusher processes rock to 127-178mm, which is then stockpiled on the s
Read More
Acrow supplies temporary bridge during Turcot Interchange project
June 28, 2018
Acrow Bridge has supplied a long-term temporary modular bridge to main contractor KPH Turcot for its work on the Turcot Interchange reconstruction in Montréal, Canada. The 32.3m-long Turcot modular steel bridge - Acrow’s longest clear span bridge in Canada – is 5m wide and has an orthotropic deck. The rented Acrow components arrived on site late last year and the bridge was opened to traffic in December. It is expected to be in place for two years. The Turcot Interchange is a three-level stack freeway int
Read More
Barge-mounted Manitowoc MLC300 lists Illinois bridge into place
June 28, 2018
The reduced footprint and floating counterweight meant that it is much more efficient for contractors to barge-mount a crawler crane. The crane can be on smaller water-based barges because the machine automatically adjusts its centre of gravity for each lift. Kraemer North America recently used an MLC300 to help replace an 84-year-old truss bridge, the 756m Savanna-Sabula Bridge near Savanna, in the US state of Illinois. The Savanna–Sabula Bridge was a truss bridge and causeway crossing the Mississippi Ri
Read More
Caterpillar and Kennametal agree component supply deal
June 28, 2018
Caterpillar has reached an agreement with Kennametal covering cutting tools for milling and stabilisation/recycling tools. Following the agreement, Caterpillar customers will be able to source special order rotors and diamond and carbide earth cutting tools for mixing and road milling applications that are manufactured by Kennametal. Kennametal products and support are now available at Cat dealerships. “This partnership provides our customers, via our Cat dealer network, access to world-class machines, a
Read More
Milling control accuracy from Roadtec
June 28, 2018
Roadtec is introducing a highly sophisticated Auto Cut package for its latest milling machines. The new Auto Cut system is offered as standard on the firm’s current generation RX-600 Cold Planer and is said to help boost milling efficiency, as well as increasing productivity and utilisation. The system is said to allow milling machine operators to raise the milling machine, track over obstacles, lower back into the cut, and resume milling at same depth, without the need for reprogramming or additional dela
Read More
Caterpillar’s mini mills offer versatility
June 28, 2018
Caterpillar is introducing three new compact milling machines, the PM310, PM312 and PM313, said to combine high performance and versatility. The firm says that its PM300 Series suits use in small-to-medium job sites where compact dimensions, optimum manoeuvrability and high production capabilities are required. The PM300 Series can be configured with one of three drum widths and a choice of wheel or track undercarriage. An articulating right leg can be positioned outboard to provide additional stability du
Read More

Highlighted Content