Volvo CE machines boost output for US quarry

At Savage Stone’s 161.9ha quarry in Jessup, Maryland, gabbro is extracted from five 13.1m-tall benches, with chemical rock hardness increasing with each lower level. The shot rock (similar to granite and good for coarse road base) used to be loaded into Volvo 31tonne and 36tonne capacity articulated haulers and 90tonne capacity Euclid rigid haulers and transported 800m uphill to the primary crusher, a Lippmann 5062 jaw crusher. The jaw crusher processes rock to 127-178mm, which is then stockpiled on the s
June 28, 2018 Read time: 3 mins
At Savage Stone’s 161.9ha quarry in Jessup, Maryland, gabbro is extracted from five 13.1m-tall benches, with chemical rock hardness increasing with each lower level.


The shot rock (similar to granite and good for coarse road base) used to be loaded into 2394 Volvo 31tonne and 36tonne capacity articulated haulers and 90tonne capacity Euclid rigid haulers and transported 800m uphill to the primary crusher, a Lippmann 5062 jaw crusher. The jaw crusher processes rock to 127-178mm, which is then stockpiled on the surge pile for the finishing plant.

As the quarry has exhausted its pit boundaries to the north and west, so expansion is moving to the south side of the pit and into lower levels of rock reserves. The quarry firm explained that as the pit deepened its haul roads grew longer and cycle times increased, which in turn slowed production. As a result, the firm looked at options that would allow it to go faster uphill, but then looked at the economic aspect of putting the primary crusher closer to the deposits and hauling rock downhill.

A major capital project started in spring 2017 to relocate the primary crusher nearly 116m below its original elevation and install conveyors to shuttle the crushed stone back uphill to the finishing plant. The production benefit is two-fold. Loaded haulers now travel downhill and can operate faster and use gravity to save on fuel consumption.  If the crushing plant is the heart of a quarry, the first line excavator is the pulse, setting cycle times by how fast it can load trucks.

As part of the expansion project the quarry upgraded its primary excavator to a Volvo EC750E to meet the increased production from the crushing plant’s new workflow. The super-abrasive environment, running 12-hour shifts five days a week, demanded a durable and powerful excavator. The 75tonne class machine is powered by a 385kW Volvo Tier 4 final engine and is matched to a Rockland 5m3 bucket that has been modified internally and externally with guards over the cutting edge and side shrouds. The buckets are lined with AR450 or 500 plate and T1.

According to Savage Stone, the firm is getting 96 hours on a set of teeth, so it is averaging three teeth changes for every oil change.

Savage Stone assigns a cost value to every piece of equipment down to the minute. This formula was developed from crunching production sheets to calculate tonnage/day. Management uses this data when evaluating when to replace equipment and as comparisons in the purchase process. The firm added that it has a certain number of tonnes it has to meet every day to cover costs.

The company looked at a number of excavators from different firms but says it opted for the Volvo CE unit as it fared well in terms of productivity and reliability, as well as offering comparatively low running costs for fuel, oil and servicing.

Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Volvo CE machines in Texas quarrying
    August 19, 2015
    A fleet of machines from Volvo Construction equipment is helping boost production at a quarry company in Texas. Family firm Conners Crushed Stone is using its Volvo CE fleet to help quarry and crush high-quality limestone at five quarries in Texas, USA. Although best known for its oil fields, the state’s natural resources also include extensive limestone deposits. Veins of limestone run throughout the state, from the heights of the state’s Big Bend Mountains all the way down to the Rio Grande on the bor
    Read More
  • Chinese quarry increasing size of Caterpillar fleet
    December 10, 2013
    Chinese quarry producer Beijing Xindadi Equipment Company is looking to increase the size of its Caterpillar machine fleet as part of its plan to increase output The company is based at Beijing Miyun Taishi Village and currently produces 1-1.5 million tonnes/year of limestone, which is used for general construction in the Beijing area. Zhang Guofeng is equipment manager for the firm and said, “Business is good because the market is not affected by the downturn.”
    Read More
  • UAE quarry facility boosting productivity
    May 15, 2015
    A United Arab Emirates quarry is putting its Volvo fleet to the test in harsh conditions A quarrying facility in the United Arab Emirates (UAE), is boosting output following the commissioning of a new machine fleet for loading and hauling duties. The quarry is located in the northeast of the UAE in Fujairah, an emirate almost entirely surrounded by mountains. This rugged landscape is the product of an estimated 800 million years of geological activity and is the source of a high quality limestone used in
    Read More
  • High quality Swedish stone
    February 10, 2012
    Close to Sweden's second largest city Göthenburg lies the efficient Jehander quarrying operation run by Heidelberg Cement. The site produces around 9,000tonnes/day at peak seasonal demand and has an output of some 1,000,000tonnes/year. The site has recently renewed its operating permission and now has the necessary approval to work until 2021.
    Read More

Highlighted Content