Products

UK government agency Highways England has awarded telent Technology Services with a major contract to manage over 30,000 roadside assets including messages signs and cameras. Under the seven-year deal worth around €510 million, telent Technology will run the agency’s National Roads Telecommunications Service in England. The centre connects seven regional control centres as well as the national traffic operations centre.

Geveko Markings says that it’s preformed thermoplastic called ChipFill can be used for repairing cracks and smaller holes in surfaces other than asphalt Repairs made with ChipFill can be done in only 20 minutes without the need for bulky machinery, according to the company. All that is needed is a brush and a gas burner. Until now, ChipFill has been used widely for road repair, but it offers easy solutions for other problems as well, such as reseating cobblestones. Thermoplastic and preformed thermoplas

The California Department of Transportation (Caltrans) District 7, in conjunction with Parsons, is implementing an advanced Arterial Management System (AMS) at 91 signalised intersections on California’s Pacific Coast Highway and Parallel Arterials from I-105 to I-110. The Pacific Coast Highway AMS Project is a critical element of the Caltrans Dynamic Corridor Congestion Management programme. Several US cities are implementing a DCCM programme which looks at major transport arteries, including rail and pub

Mott MacDonald will set up an asset management system as part of Highways England’s new technology operations centre. Under the T-TOC contract - Tools for the Technology Operations Centre – Mott MacDonald will work with Fujitsu which will develop a suite of software systems to monitor and manage electronic assets across Highways England’s network. Highways England has nearly 100,000 intelligent infrastructure devices across England’s strategic road network – trunk roads and motorways. T-TOC will enable a

A UK contractor has revamped its training to help employees avoid damaging utilities, not to mention suffering injury or loss of life, when digging. Eurovia and Ringway have set up Safe Dig Training designed to reduce underground service strikes. Strikes can occur when the ground is disturbed through works preparations, erecting site signage and repaving or resurfacing work. The safe dig areas have been built in strategic depots across England as part of the training to assess competency following a servic

Drivers in Finland now have access to a downloadable reindeer-on-road warning app for their iOS and Android smartphones. The Porokello app – Reindeer Bell - alerts users of reindeer possibly on the road by sound and colour in real time using geographic data, according to Finland’s Centre for Economic Development, Transport and the Environment of Lapland. Tests have been carried out since June 2016 when the centre started recruiting commercial drivers to try the app. When they come across reindeer either on

IRF Geneva is reaching out to partners and members throughout a series of events hosted around the world. The IRF will start the year with three major events respectively in Nice, Singapore and Sydney. IRF Geneva is pleased to support the second Pavement Preservation and Recycling Summit (PPRS) which will take place in Nice (France) on 26-28 March 2018. Better maintenance of road infrastructure and urban networks is key to support the projected level of mobility of people and goods. Preventing our roads fr

With the Northern Hemisphere in winter, it is no surprise that many of the countries in the north are now experiencing cold conditions that can make driving challenging. Driving on roads covered in ice or snow can present serious dangers, particularly for the unwary or for those inexperienced with poor conditions. Too many drivers are unaware that ABS systems can be ineffective in snowy or icy conditions. Old-fashioned driving techniques such as cadence braking are not always taught these days, but are im

Yanmar says it is launching its most impressive line-up development for 20 years, with two brand new engine families. The 4TN101 is a 3.8litre displacement engine, which lines up in the 55-105kW power range with torque up to 550Nm, while the 4TN107 has a 4.6litre displacement with power ratings ranging from 90-155kW and torque exceeding 805Nm. Both engines feature a Common Rail injection system, full authority electronics and after-cooled turbocharging (with a two-stage turbo on the 4TN107 upper ratings).

Wacker Neuson Group extends its zero-emission range with the launch of the battery-operated single vibratory plate AP1850e. The vibratory plate AP1850e is the only battery-powered plate on the market, according to Wacker Neuson. With a running time of up to one hour, it can be used for the best part of a workday on almost any building site. Electric drives are becoming ever more important for rental fleets and on projects such as interior space restructuring or tunnel construction. The modular design mean

Trimble has developed its T10 Tablet, which the firm claims is a rugged and high-performance data processing platform for use onsite. The unit offers fast computing power and a large screen and is now available through the SITECH dealer channel for use in civil engineering and construction applications. Its key features include a military-grade ruggedness to cope with tough construction site conditions, a sunlight readable display for reading text, graphics and complex maps under field conditions and a

Topcon Positioning Group announces a new 3D machine control system designed to offer a faster, modular and easily upgradeable aftermarket solution for excavation — the X-53x. “It features fully integrated GR-i3 receivers for precise positioning of the boom, stick and bucket at all times, as well as the MC-X1 controller, which offers compatibility with all brands and models of excavators and provides a customisable machine control platform to address future project demands,” said Murray Lodge, senior vice

Siemens has unveiled a range of passively safe traffic signal poles that are performance-rated against BS EN 12767 They come in a wide variety of forms, finish and lengths from 2-6m, said Keith Manston, head of product management for Siemens. The poles are CE marked with a specification label confirming key features as required by BS EN 12899 including construction material, corrosion resistance and strength characteristics.

Rockmore International is adding its new ROK 550T drill to its T Series DTH hammer line. The T Series DTH hammers are TUBELESS and use drill bits featuring industry standard shank connections without the embedded plastic blow tube/foot valve. The firm’s first T Series DTH model was the ROK 600T, a 152mm class model that uses a tubeless QL6/QL60 bit shank. The company then expanded the T Series with the ROK 60T-360T hammers that use the IR 360 bit shank without the blow tube/foot valve. And Rockmore is now