Skip to main content

News

On-board weighing for trucks
April 20, 2012
Italian technology company Outset has introduced two additional on-board weighing systems. The Lanx WL is a wireless control unit designed for use on road-going tipper trucks. It provides a real-time display of the net, gross, trailer and tractor axle weights, with an acoustic alarm to prevent overloading. The Lanx HD is intended for use in rigid dump trucks, and is directly installed in the cab. It displays the weight on board, allowing readings for each axle, and memorise round-trips for later download.
Tenstar offers stimulating machine training simulation
April 20, 2012
One company at INTERMAT probably deserves ‘ten stars’ for safer cost-effective construction machine operator training. Established in 2009, Swedish firm Tenstar Simulation (TS) offers simulator training programs for new operators of a wide spectrum of construction machines, including wheel and truck excavators, wheel loaders, and tower and lorry cranes.
Haulotte delivers substantial increase in sales
April 20, 2012
French manufacturer Haulotte has reported sales of €89m in the first quarter of 2012, compared with €72.1m for the same period last year. Equipment sales were up 28.4% and represent 78.5% of total revenue, while service and rental revenues rose by 2% and 14.1% respectively. “Overall we see a pretty good market around the world in 2012,” said chief executive Alexandre Saubot. “I am still concerned by Europe, which will have the slowest growth this year. But overall we are confident that we will achieve doubl
Ihimer adds to skid steer line-up
April 20, 2012
Ihimer, the joint venture between Japanese company IHI and Italian firm Imer, has added two skid steer loaders to its growing range of compact equipment. The AS30 and AS34 have operating weights of 3,150kg and 3,500kg respectively, with rated working loads of 850kg and 1,020kg. Power comes from a 50kW Kubota engine in the smaller machine and a 61kW Yanmar motor in the AS34. The company already has a smaller AS12 model, and will launch AS18 and AS22 skid steers at next year’s Bauma show in Munich. IHI also b
INTERMAT launch for Dynavis hydraulic oil
April 20, 2012
Chemical company Evonik has formulated an additive pack that creates multi-grade hydraulic oil for excavators. It is said to deliver a significant improvement in fuel efficiency compared to traditional mono-grade hydraulic oils. It’s called Dynavis and the key, said Evonik, is a clever viscosity improver that prevents aeration, which can cause cavitation and a loss of performance in hydraulic pumps. Dynavis’ technology is a closely guarded secret - it is not available as a pour-in additive, but is sold in
Kobelco’s new crawler cranes make European debut at INTERMAT
April 20, 2012
Kobelco used INTERMAT for the European introduction of its G series CKE range of crawler cranes –displaying the CKE2500G and the CKE800G, with lifting capacities of 250tonnes and 80tonnes respectively. Both benefit from lower fuel consumption of up to 25% partly attributed to their Stage IIIB engines having an auto idle stop (which cuts the engine if it is idling and automatically re-starts it as soon as a control is touched) and the G Winch that retains its winching speed even if the engine revs are reduce
Shantui is keen to grow both organically and by acquisition
April 20, 2012
Shantui Construction Machinery intends to grow both organically and by acquisition, according to vice president Li Dianhe. The company has relied heavily on its bulldozer line in the past but is developing a wider product range. It has bought Chinese firms making concrete equipment and road machines and is actively looking at further potential acquisitions. Dianhe said, “We are still negotiating.” Although it is very strong in China, and particularly with its bulldozers, exports are an important part of
ENH shows bitumen emulsion plant technology at INTERMAT
April 20, 2012
ENH may operate in 60 countries but its bitumen emulsion plants are relatively new to the French market. But interest from French contractors at the show is proving high, said managing director Erik Haugaard. Mobile ENH equipment is typically used for producing a mix for road repairs. Basing the ENH mill near to where repairs are taking place enables the patching equipment to return at regular intervals for a new supply of material.
Atlas Copco to establish new competence centre in Spain
April 20, 2012
Atlas Copco, which is opening a new competence centre in Europe, is to move a divisional headquarters to China and has also hinted at further acquisitions. The new Atlas Copco Generator Competence Centre in Zaragoza, Spain, is scheduled to be in full operation by 2013, and is subject to final approval by local authorities. The decision to launch the centre for generators was announced by Atlas Copco’s portable energy division at INTERMAT.
HMK300LC dominates Hidromek’s INTERMAT stand
April 20, 2012
Dominating Hidromek’s stand at INTERMAT is its 30.5tonne HMK300LC excavator. In common with the other gen series excavators, the HMK300LC has Hidromek’s latest cab design, which offers more room for the operator and the “Opera” user interface designed to optimise the excavator’s force, speed and consumption.
Inan Makina shows expanded attachment range
April 20, 2012
Inan Makina is best known as a breaker company but has greatly expanded its range in the last year to meet customer demand for other types of attachment. Breakers are joined on the stand by examples from its other lines, which now include hydraulic compactors, augers, pulverisers, crushers and sorting grabs. Among the breakers at the show is the 5tonne MTV 505, which is one of the largest models in the range. Some 60% of Inan Makina’s products are for its local Turkish market and 40% for elsewhere. Vice cha
Atlas Copco launches its new Hurricane B4-41/1000 CE booster compressor
April 20, 2012
Atlas Copco has launched its new Hurricane B4-41/1000 CE booster compressor, which it says offers advanced operational, safety and maintenance features that result in low downtime. “Drilling for oil, gas, water and geothermal energy are critical operations where there is little margin, or tolerance, for booster failure and downtime.
Caterpillar will boost sales of its paving products with an array of new models coming to market
April 20, 2012
Josh Meyer, region manager for Caterpillar’s paving products in EAME territories, says the firm expects to see considerable sales growth. “The paving business is back in the mode of expansion. Even in Europe we’re starting to see growth in spending in infrastructure and growth in the paving business,” said Meyer.
Daemonator says ‘I’ll be back…’
April 20, 2012
The Daemonator struck fear into the hearts of its competitors during INTERMAT, according to Won-Hae Lee, chairman of Korean attachment firm Daemo Engineering. Complete with flashing lights and intimidating electronic voice, the attachment-wielding 2.4m high robot, modelled loosely on a Transformers character, uses Daemo’s hammers, shears, compaction plates and grabs as part of its construction.
INTERMAT launch for Cat CD44B compactor
April 20, 2012
Cat has revised its asphalt compactor range with Stage IIIb engines, revised drum options and a new cab layout. The changes also bring an all-new model – the CD44B – in the seven/eight tonne class, taking the model count to four. A revised cab now gives better sightlines to the drum edges and while the lateral side-shift for the operator’s seat has been retained, the previous 180-degree rotation is now extended to 360-degree rotation, giving the operator more freedom