INTERMAT visitors first to see new high flow Bobcat telehandler

Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
January 6, 2017 Read time: 2 mins
The high flow version of Bobcat’s TL470 telehandler
RSS1130 Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler.

The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine.

The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds.

In addition to providing a higher flow rate, the bigger pump is also load sending while the standard unit has a simple gear pump. A 40kmh travel speed is an option with both configurations.

The high-flow machine shares Bobcat’s new cab design, which has no rear pillar on the right hand side. This provides an unobstructed view for the operator while still giving full ROPS and FOPS protection. A screen guard is an option.

www.bobcat.com

Hall: 6 Stand: G079

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • Loads better weighing with Loadrite
    January 6, 2017
    Loadrite global marketing communications manager Simon Rush says the New Zealand firm’s on-board weighing systems for construction machines have been designed with operators in mind. “They take raw data and turn it into something really easy to understand,” said Rush. “Operators are only using one button 90% of the time, which means they are more likely to take up using them.” The Loadrite X-Weigh 2350, being exhibited at INTERMAT, can track overall tonnes and tonnes per hour throughout a construction proje
    Read More
  • Loads better weighing with Loadrite
    April 18, 2012
    Loadrite global marketing communications manager Simon Rush says the New Zealand firm’s on-board weighing systems for construction machines have been designed with operators in mind. “They take raw data and turn it into something really easy to understand,” said Rush. “Operators are only using one button 90% of the time, which means they are more likely to take up using them.” The Loadrite X-Weigh 2350, being exhibited at INTERMAT, can track overall tonnes and tonnes per hour throughout a construction proje
    Read More
  • Crawler crane hand-over is big deal at INTERMAT
    April 20, 2012
    INTERMAT was the venue for the official hand-over of one of the world’s first Kobelco CKE 2500G crawler cranes. Herman Smit, chief operating officer of crane giant Mammoet, came to the show on Friday to meet Kobeloc Crane’s president and chief executive officer Isao Aida for the handover of the 250tonne lattice boom machine. While he was at the show Smit confirmed orders for another 46 cranes of 180 tonnes and 250tonnes capacity.
    Read More
  • INTERMAT launch for updated D6N
    January 6, 2017
    Caterpillar has given its D6N fine grading and muck-shifting dozer an EU Stage IIIb emissions-compliant engine for 2012. The 129kW C6.6 Acert engine now gets a DOC and DPF with passive regeneration, helping the machine to a 2% productivity boost primarily from sharper throttle response. There is also a selectable economy mode – linked to 2nd gear – that automatically shifts the dozer into 3rd gear when reversing, and simultaneously reduces engine revs from 2000 to 1700rpm. This system can give fuel saving
    Read More

Highlighted Content