INTERMAT visitors first to see new high flow Bobcat telehandler

Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler. The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine. The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds. In addition to providing a higher flow rate, the bigg
January 6, 2017 Read time: 2 mins
The high flow version of Bobcat’s TL470 telehandler
RSS1130 Bobcat has introduced the TL470HF, a high-flow version of its recently launched telehandler.

The HF version shares the 4tonne/7m capacities of the standard machine but comes with a 100kW engine (instead of 75kW) and a 190litre/min pump instead of 100litres/min in the standard machine.

The result is higher traction power and cycle times that are up to 30% quicker than with the normal flow version with the no-load lift time of less than five seconds.

In addition to providing a higher flow rate, the bigger pump is also load sending while the standard unit has a simple gear pump. A 40kmh travel speed is an option with both configurations.

The high-flow machine shares Bobcat’s new cab design, which has no rear pillar on the right hand side. This provides an unobstructed view for the operator while still giving full ROPS and FOPS protection. A screen guard is an option.

www.bobcat.com

Hall: 6 Stand: G079

RSS
View more stories
View more videos

For more information on companies in this article

Related Content

  • INTERMAT launch for updated D6N
    April 20, 2012
    Caterpillar has given its D6N fine grading and muck-shifting dozer an EU Stage IIIb emissions-compliant engine for 2012. The 129kW C6.6 Acert engine now gets a DOC and DPF with passive regeneration, helping the machine to a 2% productivity boost primarily from sharper throttle response. There is also a selectable economy mode – linked to 2nd gear – that automatically shifts the dozer into 3rd gear when reversing, and simultaneously reduces engine revs from 2000 to 1700rpm. This system can give fuel saving
    Read More
  • INTERMAT launch for Merlo stability control
    January 6, 2017
    Following the successful integration of CDC Dynamic Load Control management in its agricultural telehander range, Merlo is introducing the technology to its construction models at INTERMAT The system is an advanced method of load management, and effectively places a real-time image of the handler’s load chart on a colour screen in the cab, showing the weight and position of the load on the chart, at all times.
    Read More
  • INTERMAT launch for Merlo stability control
    March 16, 2012
    Following the successful integration of CDC Dynamic Load Control management in its agricultural telehander range, Merlo is introducing the technology to its construction models at INTERMAT The system is an advanced method of load management, and effectively places a real-time image of the handler’s load chart on a colour screen in the cab, showing the weight and position of the load on the chart, at all times.
    Read More
  • More output for less fuel from Atlas Weyhausen’s new E Series compact wheeled loaders
    January 6, 2017
    Atlas Weyhausen’s new E Series wheeled loaders will be on display at Bauma with the AR 65e, AR 75e, AR 80e and AR95e Super all on view. Using newly developed Deutz engines, the new wheeled loaders offer up to 12% more output with lower fuel consumption figures. A key design feature of the engines is that they do not contain a particle filter and therefore are easier to maintain, claims the German manufacturer. There is a new steering valve on the E Series too, allowing operators to run the machine electroni
    Read More

Highlighted Content