Skip to main content

Hitachi debuts its hybrid hydraulic excavator ZH210-6 in Europe

The ZH210-6 was presented by the Hitachi official Belgium dealer Luyckx at the recent Matexpo biennial trade fair in the Kortrijk Xpo centre. Kortrijk Xpo, in the West Flanders city of Kortrijk, is one of the country’s largest indoor exposition arenas. Hitachi said that the ZH210-6 has the lowest ever fuel consumption for a Hitachi medium hydraulic excavator. It has an advanced hydraulic system and a new lightweight arm.
November 14, 2017 Read time: 3 mins
Compared with the previous ZH-5 hybrid model, the ZH210-6 uses 12% less fuel
The ZH210-6 was presented by the 233 Hitachi official Belgium dealer Luyckx at the recent Matexpo biennial trade fair in the Kortrijk Xpo centre.


Kortrijk Xpo, in the West Flanders city of Kortrijk, is one of the country’s largest indoor exposition arenas. Hitachi said that the ZH210-6 has the lowest ever fuel consumption for a Hitachi medium hydraulic excavator. It has an advanced hydraulic system and a new lightweight arm.

Compared with the previous ZH-5 hybrid model, it uses 12% less fuel - in both PWR and ECO mode - and compared with the standard ZX210-6, it offers a 20% fuel saving. The new power unit of the ZH210-6 consists of a 73kW diesel engine (smaller than the ZH210-5) and 44kW electric power assist motor to significant reduce fuel consumption.

The diesel engine output alone is sufficient for ordinary operation, and when maximum power is required for heavy workloads, the electric power assist motor can also be used. This makes the new hybrid model more efficient than the ZH210-5 and the standard ZX210-6

The new integrated power unit led to the adoption of a new electrical storage device for the ZH210-6. Instead of the capacitor of the ZH210-5, the new model is equipped with a large-capacity lithium-ion battery developed by Hitachi Automotive Systems. Hitachi said that this has significantly increased continuous output to the electric power assist motor, which means it is able to support the engine power considerably and for a longer period.

During light operation, the electric power assist motor acts as a generator and charges the lithium-ion battery unit, similar to the way it works in a hybrid car.

A further update from the previous model is an enhanced version of the hydraulic TRIAS-HX II system. The hydraulic electric swing has also been improved, with an electric motor torque maximum of 220Nm, compared with 160Nm on the ZH210-5.

Unlike the standard Zaxis-6 hydraulic excavators, the ZH210-6 does not use SCR (selective catalytic reduction) technology, which means fewer additional costs for owners, as AdBlue is not required.

Instead the new model complies with Stage IV standards by incorporating an advanced diesel oxidation catalyst (DOC) and diesel particulate filter (DPF).

The arm of the ZH210-6 hybrid hydraulic excavator is manufactured from high-tensile steel that is 15% lighter than the standard arm of both the ZH210-5 and ZX210-6.

For more information on companies in this article

Related Content

  • Komatsu’s electric micro
    October 12, 2022
    An electric version of Komatsu’s very mini excavator is among the latest developments in the utility sector that include a new Hitachi wheeled excavator and an addition to Sunward’s tracked line-up
  • New asphalt paving developments are coming to market
    January 7, 2015
    Atlas Copco introduces new low emission diesels in its latest large paver models - Mike Woof writes The large pavers from Atlas Copco’s Dynapac range are now compliant with the Tier 4 Final/Stage IV emissions regulations due to the installation of new engines. Running costs are also said to have been reduced due to lower fuel consumption and the firm claims each of the latest models can offer a fuel saving of 4200 litres/year, as well as a reduction in CO2 emissions of 11tonnes/year.
  • Cummins shows compact single-module DPF-SCR technology
    January 6, 2017
    Cummins Emissions Solutions, the engine manufacturer’s specialist after-treatment division, has developed a single-unit DPF-SCR module concept that is 60% smaller and 40% lighter than its current two-box solution. The EcoFit single module has been designed to work with Cummins’ Stage V engines when they arrive in 2019. “We could achieve Stage V with our current DPF-SCR system, however Stage V is an opportunity to take this technology further,” said Richard Payne, Cummins’ off-highway regulatory affairs dire
  • Cummins shows compact single-module DPF-SCR technology
    April 21, 2015
    Cummins Emissions Solutions, the engine manufacturer’s specialist after-treatment division, has developed a single-unit DPF-SCR module concept that is 60% smaller and 40% lighter than its current two-box solution. The EcoFit single module has been designed to work with Cummins’ Stage V engines when they arrive in 2019. “We could achieve Stage V with our current DPF-SCR system, however Stage V is an opportunity to take this technology further,” said Richard Payne, Cummins’ off-highway regulatory affairs dire