Skip to main content

Breaking at the face

Italian customer Marocca Group is using an Indeco HP18000 hydraulic breaker (the heaviest hydraulic breaker on the market at present) for primary demolition at a limestone quarry in Anagni, close to capital Rome. The 40ha quarry produces high grade limestone in 21 different sizes to meet an array of construction needs, and the bespoke fully automated crushing and screening plant is able to process over 500m³/hour of rock. By using the HP18000 in a primary winning application, Marocca Group has also been abl
July 16, 2012 Read time: 2 mins
RSSItalian customer Marocca Group is using an 237 Indeco HP18000 hydraulic breaker (the heaviest hydraulic breaker on the market at present) for primary demolition at a limestone quarry in Anagni, close to capital Rome.

The 40ha quarry produces high grade limestone in 21 different sizes to meet an array of construction needs, and the bespoke fully automated crushing and screening plant is able to process over 500m³/hour of rock.

By using the HP18000 in a primary winning application, Marocca Group has also been able to significantly reduce operating costs by minimising its use of explosives, which are costly and subject to strict regulations. Many quarry operators are keen to cut their reliance on blasting: this has been particularly apparent in Italy, where regulations have long been much tougher than in other European countries.
Comparative research carried out on rock produced from quarries using breakers for primary winning against blasted stone shows other benefits from using hydraulic hammers. Where breakers are used, the stone produced features less micro-cracking and is said to offer high performance in civil engineering applications as it is less likely to feature crack propagation.

The Marocca Group has been using Indeco breakers in its quarries for five years and in addition to the huge HP18000 it also has an HP2500, an HP7500 and an HP12000. Maintenance for its Indeco breakers is provided by Fratelli Alpassi, while for scheduled maintenance and periodic overhaul, the Bari plant also provides servicing.

The HP18000 is being used on a 120tonne 233 Hitachi excavator fitted with a Lenhoff quick coupler. The breaker is mounted on the quick coupler as Marocca also uses a ripper and a bucket on the excavator when required.

According to Marocca, the HP18000 is able to carry out the work of two mid-sized breakers, and it can break up the hardest blocks of materials, enabling it to clean each seam faster, a critical procedure for safety and for restoring the site.
RSS

For more information on companies in this article

Related Content

  • Debut for Godwin’s low-head Vac-Prime pump
    January 6, 2017
    Xylem company Godwin has launched the Vac-Prime low-head pump to complement its Dri-Prime medium- to high-head range. Xylem’s Godwin Vac-Prime has been specifically designed for lower-head dewatering applications. It can manage heads of 11m to 25m, flows of 100m3/hour to 374m3/hour and solids with sizes from 45mm to 75mm. The pump is available in 4” and 6” (101mm and 152mm) versions.
  • Debut for Godwin’s low-head Vac-Prime pump
    April 17, 2013
    Xylem company Godwin has launched the Vac-Prime low-head pump to complement its Dri-Prime medium- to high-head range. Xylem’s Godwin Vac-Prime has been specifically designed for lower-head dewatering applications. It can manage heads of 11m to 25m, flows of 100m3/hour to 374m3/hour and solids with sizes from 45mm to 75mm. The pump is available in 4” and 6” (101mm and 152mm) versions.
  • Rammer’s tough breakers for tunnelling
    March 31, 2016
    Based on customer demand for new, extreme duty hydraulic breakers, Rammer is launching two new PRO hammers. The Rammer 2577 PRO and Rammer 5011 PRO are said to be innovative and tough.
  • R&W takes in-house the recycling of dry and wet waste
    January 15, 2016
    With the introduction of EU regulations in 2012 controlling the disposal of dry and wet waste from road sweepings and gully waste and it is not acceptable to send this material to landfill. Many local authorities have had to find an alternative solution. R&W Civil Engineering in the southern UK country of Hampshire, is a specialist in highway construction, maintenance and other transport related services. It, along with other contractors started transporting waste material to the nearest processing stati