Test track milling with Roadtec

A milling machine from Roadtec has carried out important work at the National Centre for Asphalt Technology (NCAT) test track in the US. The 2.7km NCAT test track is used for asphalt pavement testing and research. As the facility is important to the advancement of asphalt technologies, Roadtec donates its time, equipment and personnel to carrying out rehabilitation work at the test track. An RX900E model was donated by Roadtec to NCAT and was used by David Bussard and Charlie Butler to mill to depths from
September 11, 2018 Read time: 1 min

A milling machine from 1252 Roadtec has carried out important work at the National Centre for Asphalt Technology (NCAT) test track in the US. The 2.7km NCAT test track is used for asphalt pavement testing and research. As the facility is important to the advancement of asphalt technologies, Roadtec donates its time, equipment and personnel to carrying out rehabilitation work at the test track. An RX900E model was donated by Roadtec to NCAT and was used by David Bussard and Charlie Butler to mill to depths from 28.6mm to 1.07m. The machine had to mill the 8.5m-wide track in a number of passes and was fitted with a 2.2m- wide drum, featuring teeth on a 16mm spacing.

Recycling

For more information on companies in this article

Related Content

  • Simex RS 16 planer for creating rumble strips
    March 22, 2017
    Simex says that its new RS 16 planer for creating rumble strips is an efficient alternative to costly specially designed machines or small manual equipment Rumble strips created by intermittent milling of the wearing course offer the advantage of lower production costs and a higher durability than those made using elastoplastic adhesives - laminates. Compared to adhesives, rumble strips created by surface milling also have the important advantage of being indented and not raised, a characteristic that av
    Read More
  • Advances in milling
    July 23, 2024
    Some major machine manufacturers have introduced improved milling equipment to the market - Mike Woof reports
    Read More
  • Milling control accuracy from Roadtec
    June 28, 2018
    Roadtec is introducing a highly sophisticated Auto Cut package for its latest milling machines. The new Auto Cut system is offered as standard on the firm’s current generation RX-600 Cold Planer and is said to help boost milling efficiency, as well as increasing productivity and utilisation. The system is said to allow milling machine operators to raise the milling machine, track over obstacles, lower back into the cut, and resume milling at same depth, without the need for reprogramming or additional dela
    Read More
  • Asphalt milling machine gives a fine finish
    March 20, 2012
    High micro-milling results are said to be achievable using the new cutter from Roadtec. This product has been developed to meet the growing demand for thinner friction courses, which require proper surface preparation. Delamination of thin courses can occur when surfaces are prepared with conventional milling equipment, according to Roadtec. The firm adds that water can get trapped in the recesses of a conventionally milled surface, leading to premature pavement failure.
    Read More

Highlighted Content