Skip to main content

Pervious concrete improves storm water drainage

MINNESOTA CITIES including Minneapolis and Richfield have been testing pervious concrete on parking lots and other hard surfaces to improve storm water management. In Shoreview MN, the authorities went a stage further by opting to replace a storm drainage system with pervious concrete.
April 10, 2012 Read time: 2 mins
North County Concrete set up its Allen Triple Roller Tube Paver to pave the full width streets in one pass
MINNESOTA CITIES including Minneapolis and Richfield have been testing pervious concrete on parking lots and other hard surfaces to improve storm water management. In Shoreview MN, the authorities went a stage further by opting to replace a storm drainage system with pervious concrete. The project includes the reconstruction of five streets in the Woodbridge neighbourhood totalling around 1.6km of pervious concrete streets. Local firm 1230 Cemstone supplied the 1,412m3 of pervious concrete for this project. The pervious concrete was paved 178mm thick and 6.4m wide between two surmountable kerbs. The pervious concrete was placed over 457mm of crushed aggregate base which will allow the storm water to drain through the pervious concrete and filter through the aggregate before re-entering the soil beneath. The job was awarded to North Country Concrete, which decided to use an Allen Model 255CD Triple Roller Tube Paver from 156 Allen Engineering. The paver has a strike-off tube that continuously pushes the excess concrete in front of the machine and two full length drive roller tubes for compaction. The strike-off tube has a vertical adjustment which was set at 19mm above finish grade and the contractor explained that this allowed the machine to achieve high compaction, boosting the durability of the pavement.

For more information on companies in this article

Related Content

  • Asphalt paving developments
    March 13, 2012
    US and European asphalt paving needs are different, but some firms are bridging that gap, reports Mike Woof. With a clear differentiation between the US and European asphalt paving markets, manufacturers from the latter are now developing machines aimed at the former. The US and European markets for paving machines have developed along very different lines. North American pavers are designed for high throughputs and high paving rates, having been designed to meet a need to build roads over long distances wi
  • Latest bitumen mixes improve roads, reduce noise
    February 14, 2012
    Special bitumen mixes and machines are capable of improving the service life of roads and reducing noise. Mike Woof and Patrick Smith report. The need to improve traffic flow in an important part of the City of Poznan, Poland, led to the decision to build a new 1.13km long dual carriageway.
  • Texas highway project tackles congestion
    April 10, 2012
    A new highway project in Texas will tackle peak congestion
  • Terex built for bridge paving
    November 29, 2012
    To meet a need to carry out complex modern bridge designs, the Terex Bid-Well 3600 paver is available with truss transition inserts, increasing maximum paving width from 27.4-33.5m. The inserts adjust truss depth from 914-1219mm toward the paver’s centre, reducing frame deflection and this is said to increase surface profile smoothness. Offering paving widths from 4.6-33.5m with optional transition inserts, the 3600 gives companies more versatility for paving a wide variety of bridge designs, including mult