Material transfer vehicles for Poland

Roadtec Shuttle buggies are now being used on major road projects in Poland. This follows a decision made by the Polish road authority, GDDKIA, to use material transfer vehicles on highway projects. The need for a smooth running surface is paramount on highways as in Poland these tolled links can allow speed limits of up to 140km/h. This is why GDDKIA decided the use of a material transfer vehicle was crucial to optimising mix delivery into pavers, so as to help optimise surface finish.
April 1, 2014 Read time: 2 mins
Surface finish has been optimised due to the use of material transfer equipment from Roadtec
1252 Roadtec Shuttle buggies are now being used on major road projects in Poland. This follows a decision made by the Polish road authority, GDDKiA, to use material transfer vehicles on highway projects.

The need for a smooth running surface is paramount on highways as in Poland these  tolled links can allow speed limits of up to 140km/h. This is why GDDKiA decided the use of a material transfer vehicle was crucial to optimising mix delivery into pavers, so as to help optimise surface finish.

However, GDDKiA may start to apply similar requirements to some toll-free express roads that have speed limits of up to 120km/h. The response from GDDKiA has been favourable with regard to the quality, with one project seeing 12km of binder being laid in one in one week, using an 11m wide screed paving a 150mm thickness.

Poland’s 1250 Astec Road Machinery dealer, Road Construction Technology, has already supplied a number of Shuttle Buggies to contractors in the country, including Salini, Impreglio and PBDIM Kobylarnia. The first machine supplied was initially driven by Astec's operator who provided operational and maintenance training for the customer's staff, with a second machine being delivered one week later. Shuttle Buggies were also used on a 63km stretch of the key A1 highway project for four months. Contractor Kobylarnia used the machines on the A1 at Ciechocinek, with material supplied by an Ammann plant located about 45 km from the site and able to produce some 3,000tonnes/day. The mix was delivered using 25tonne capacity semi-trailers.

Paving was carried out by an ABG/2394 Volvo Titan 8820 featuring a fixed screed and two hydraulic extensions to lay down the base course, binder and wearing courses to a width of 11.5m.

Remixing the asphalt and feeding the paver through the Shuttle Buggy helped deliver a homogeneous material and allowed continuous paving through each shift. The use of a material transfer vehicle also reduced the number of trucks needed and the turnaround time to the mixing plant and back to the job site. The two Roadtec machines also benefit from automatic cleaning systems, which helps reduce maintenance needs.
Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Novel twin layer paving technology saves time
    February 28, 2012
    German paver specialist Vögele reports that market acceptance is growing for its novel twin layer paving technology
    Read More
  • Continuous material transfer from Roadtec
    June 14, 2017
    Roadtec is unveiling its new MTV-1100e material transfer vehicle. The firm says that the new model has been designed from the ground up using experience developing MTVs, combined with customer feedback. It will not replace the existing and well-proven 2500 Shuttle Buggy, but will instead broaden the firm’s offering for the material transfer vehicle (MTV) market. The machine is being developed as an evolution of the firm’s MTV-1100e feeder model however and will not feature the remixing capability of the Shu
    Read More
  • Asphalt advances and industry innovations in paving
    May 20, 2014
    Asphalt paving technology continues to develop, benefiting from new technologies and new diesel engines - Mike Woof reports The asphalt paving equipment market is seeing the introduction of new low emission engines that will meet the Tier 4 Final regulations for Europe and North America. These have required some major engineering changes, with firms now having to install bulky exhaust after-treatment systems and additional cooling for engines and turbos.
    Read More
  • Advancing asphalt paving technology
    April 5, 2016
    Asphalt paver manufacturers are meeting demands for high performance machines that can deliver a quality mat - Mike Woof reports Major manufacturers are rolling out ranges of new asphalt pavers designed to meet the latest emissions regulations for Europe, as well as developing models to suit customers in developing nations. The firms have designed many of the latest machines to meet tough new emissions legislation, although versions will also be available for less regulated markets also. Ammann has up
    Read More

Highlighted Content