Effective joint heating

Heat Design Equipment (HDE) has introduced updated versions of two of its successful products, the HDE 750 2TMT asphalt maintenance trailer and the HDE JMH 500-PA asphalt joint heater. The asphalt maintenance trailer heats up and softens an area of asphalt, allowing it to be reworked and repaired.
October 3, 2014 Read time: 1 min

7654 Heat Design Equipment (HDE) has introduced updated versions of two of its successful products, the HDE 750 2TMT asphalt maintenance trailer and the HDE JMH 500-PA asphalt joint heater. The asphalt maintenance trailer heats up and softens an area of asphalt, allowing it to be reworked and repaired. According to HDE, the infrared heaters can soften the top 60mm of asphalt to the original mixing temperatures in between five and 10 minutes. The units can be towed to site behind a truck and can then be used to reheat a deteriorated area of asphalt, with a contractor then adding new material and compacting the area in around 20 minutes. HDE’s longitudinal joint heater attaches to pavers to heat the cold joints before the next lane of asphalt is placed. Infrared heaters reheat the edge of the lane, allowing the contractor to then compact the joint and meet specifications.

Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Iowa expects longer lasting road surface
    June 9, 2015
    In the US state of Iowa, tough paving specifications are resulting in contractors delivering road surfaces that will last longer. The Iowa Department of Transportation (I-DOT) expects to see a highway road surface last 20 years and recently let the contract for a 25.7km road resurfacing project for Highway 92 between Winterset and Greenfield. The 40km link between the two towns sees an average 1,365 cars/day travel on the highway, which was last worked on in 1994 and its surface was due for replacement.
    Read More
  • Bitumen technology reduces maintenance costs
    April 12, 2023
    Looming net zero deadlines, and impetus from the private sector are accelerating the take up of carbon-saving technologies
    Read More
  • Urban paving in cold weather
    February 23, 2018
    UK Contractor Elm Surfacing recently carried out a milling and repaving job in Brixton in London. The job was carried out on Brixton Water Lane, with the firm using Wirtgen milling machines to remove the top layers of asphalt from the road surface. Repaving was then carried out using a Vögele asphalt paver, with a large twin drum roller then being used to compact the surface. Asphalt paving was carried out in two layers, replacing the binder course and wearing course, although the original base course was l
    Read More
  • Road marking system providers’ latest technology in-demand
    April 3, 2014
    The latest road marking systems from leading manufacturers are in demand in Europe, Africa, the Middle East and South America. Guy Woodford reports Ennis-Flint recently saw its Third Generation Waterborne Fast Dry Paint with low VOC applied on a Portuguese motorway by Trafiurbe and F.L Gaspar, two of the country’s leading contractors. The line marking is said to have been applied in response to demands from Portuguese authorities for higher specifications of line markings across the country’s highway net
    Read More

Highlighted Content