Hamburg-Finkenwerder airport has new runway surface

Hamburg’s Finkenwerder airport is now benefiting from a new runway surface following work carried out by contractor KEMNA BAU. The company recently used machines from Dynapac to resurface 36,000m2 of the runway track in Hamburg-Finkenwerder, a facility used by Airbus. The airport handles around 10-15 take-offs and landings/day when aircraft are either undergoing flight testing or being delivered to customers, as well as for deliveries of components by transport aircraft. The project was tricky as the
August 21, 2013 Read time: 3 mins
The contractor had to pave 36,000m2 within a short time frame using the Dynapac pavers and materials feeders

Hamburg’s Finkenwerder airport is now benefiting from a new runway surface following work carried out by contractor KEMNA BAU.

The company recently used machines from 206 Dynapac to resurface 36,000m2 of the runway track in Hamburg-Finkenwerder, a facility used by Airbus. The airport handles around 10-15 take-offs and landings/day when aircraft are either undergoing flight testing or being delivered to customers, as well as for deliveries of components by transport aircraft.

The project was tricky as the contractor had just four days in which to carry out the resurfacing so as to avoid impinging on air traffic. In this short time slot, the firm had to mill out the old asphalt surface down to the original binder course and then repave this with new asphalt. In addition, the contractor was also responsible for the subsequent application of the markings.

To meet the tight time schedule, the contractor used machines working together. Three Dynapac pavers were brought to the site along with Dynapac material feeders to meet the high surface requirements stipulated by the aircraft manufacturer Airbus. The three SD2550CS pavers were set up with R300 TV rigid screeds that were 12m wide. “In order to progress as quickly as possible, we decided to use two staggered machine units, consisting of a paver and a feeder,“  Henning Peter from KEMNA BAU explained. In case of any problems with the equipment, the third Dynapac paver and materials feeder were near at hand on standby.
The firm used the latest version of the MF2500 CS feeder with its short conveyor, which was launched at the 688 Bauma 2013 exhibition a few months ago. The contractor also used the new MF2500 CL version of the feeder with its long conveyor and

both machines worked reliably, with the standby units not being required in the end. As the two pavers were used alongside each other, they were also able to lay the surface with a hot-to-hot joint, which allowed a better bond and will contribute to a longer working life, as well as improving surface quality.

The contractor was able to use the machines to pave the surface and meet the tight quality requirements of the client. The specification stated that the new asphalt surface would not deviate more than +/-0.2% from the desired slope, while unevenness to be a maximum of 3mm over a 4m long test section.
Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • G&Z introducing new slipform paver
    January 6, 2017
    A new and more compact slipform paver is being introduced by Guntert & Zimmerman, widening the firm’s range of models. The company has been known in the past for its large slipform pavers used in road and airport runway jobs but in recent years has developed smaller and more compact units. The S400 shares many of its features with the existing S600, which was previously the most compact model in the line-up. The firm’s German representative, Peter Hedke said, “It’s the smallest machine we’ve ever built.”
    Read More
  • Dynapac introduces the new F1200 CS paver
    January 6, 2017
    A compact, powerful and reliable machine with the laying capacity of 300tonnes/hour is how Dynapac describes its new F1200 CS paver. “Its flexibility in working widths and material filling possibilities makes the Dynapac F1200CS the perfect partner for a numerous variation of job sites,” says the company. It features the newest technology with a four-cylinder Stage IIIB (Tier 4i) Deutz engine for smooth running behaviour and significant low emission level.
    Read More
  • Dynapac introduces the new F1200 CS paver
    February 12, 2013
    A compact, powerful and reliable machine with the laying capacity of 300tonnes/hour is how Dynapac describes its new F1200 CS paver. “Its flexibility in working widths and material filling possibilities makes the Dynapac F1200CS the perfect partner for a numerous variation of job sites,” says the company. It features the newest technology with a four-cylinder Stage IIIB (Tier 4i) Deutz engine for smooth running behaviour and significant low emission level.
    Read More
  • Terex built for bridge paving
    November 29, 2012
    To meet a need to carry out complex modern bridge designs, the Terex Bid-Well 3600 paver is available with truss transition inserts, increasing maximum paving width from 27.4-33.5m. The inserts adjust truss depth from 914-1219mm toward the paver’s centre, reducing frame deflection and this is said to increase surface profile smoothness. Offering paving widths from 4.6-33.5m with optional transition inserts, the 3600 gives companies more versatility for paving a wide variety of bridge designs, including mult
    Read More

Highlighted Content