Hydraulic breakers key to Hyderabad road project

The new Hyderabad Outer Ring Road (ORR) project is a 158km eight-lane highway encircling the Andhra Pradesh city. It has been designed to relieve congestion in and around the city and to act as a hub for accessing India's national highway network, and is being built for the Hyderabad Metropolitan Development Authority. Indian contractor Ramky Infrastructure is relying on an Atlas Copco MB 1700 hydraulic breaker to break granite as aggregates at a quarry site adjacent to the new road. The rock is bein
May 8, 2012 Read time: 2 mins
Ramky Infrastructure's Atlas Copco MB 1700 hydraulic breaker at a quarry site near the new road

The new Hyderabad Outer Ring Road (ORR) project is a 158km eight-lane highway encircling the Andhra Pradesh city.

It has been designed to relieve congestion in and around the city and to act as a hub for accessing India's national highway network, and is being built for the Hyderabad Metropolitan Development Authority.

Indian contractor 1236 RAMKY Infrastructure is relying on an 161 Atlas Copco MB 1700 hydraulic breaker to break granite as aggregates at a quarry site adjacent to the new road.

The rock is being used as aggregate for the 22km stretch of the highway that Ramky Infrastructure is building. The company is part of the Ramky Group, which also formed Ramky Elsamex Hyderabad Ring Road in 2007 to build and operate parts of the ORR on a buildoperate- transfer basis.

For construction its section of the ORR, Ramky is currently building between Shamshabad and Gachibowli, it has deployed two 200tonnes/hour stone crushers at the site.

Mr T Haribabu, head of transportation for Ramky on this section of the ORR, says that controlled blasting is being used to excavate the rock, with small amounts of explosives being used to avoid possible cracking of buildings in nearby residential areas.

Rock is broken into fragments between 1.5-1.8m in size, and these are trucked to the breaking area where the MB 1700 is working in a static position, mounted on an L&T 2300 Komatsu PC 200 20tonne hydraulic excavator.

The 1,700kg hydraulic MB 1700 breaker is designed to work on excavators in the 19-32 tonne range, and on Ramky's section of the ORR it is being used to break the rock into pieces of between 500-600mm. These are then loaded into dump trucks and conveyed to the site, where they are fed directly into the crushers.

Ramky moved onto the site late in 2009 and is scheduled to complete the section of highway in November 2012.
Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Indian quarry boosts wear life and output
    June 20, 2016
    An Indian quarry facility has seen increased uptime and gains in overall efficiency due to the installation of new wear components in its crushing system Installing new distributor plates in this Indian granite quarry has increased its plate operational lifetime by 400-500%. Panchami Stone has fitted the unique HX900 plates to the 85 HP rotor of its Sandvik Construction CV218 VSI, reducing its replacement costs by 50%. The Panchami Stone granite quarry is located 60km from Bangalore, in the south of I
    Read More
  • Dynapac develops asphalt remixing system
    September 30, 2015
    Atlas Copco is now introducing its Dynapac Remixer, which is designed to deliver a high quality, homogeneous asphalt mix The unit has been designed to fit inside the hopper of a paver and can help boost mat quality. Research shows that thermal and mechanical segregation of the asphalt mix can trigger problems in the mat including unevenness and irregular surfaces, a larger void content and reduced compaction. These issues can cause long-term problems and will shorten the service life of the paved surf
    Read More
  • Effective, efficient long reach excavators
    April 13, 2012
    Long reach excavators now dominate the demolition sector - Mike Woof reports The last 10-15 years have seen the way demolition work is carried out change dramatically. Safety issues have long been of concern in the demolition sector, with the industry having been criticised for not doing enough to protect its workforce. Demolition projects can be dangerous due to the very nature of the job, with old structures being knocked down and broken up on-site. There is a substantial risk to site workers from
    Read More
  • Effective, efficient long reach excavators
    February 15, 2012
    Long reach excavators now dominate the demolition sector - Mike Woof reports
    Read More

Highlighted Content