Skip to main content

Lumitex lights up Melbourne's EastLink tunnels

The 1,066 high-pressure sodium lights have been exchanged for 1,174 Lumitex LEDs throughout the EastLink network's 1.6km twin tunnel complex in Melbourne, Australia.
By David Arminas June 18, 2021 Read time: 3 mins
Around 60 technicians using 22 scissor lifts exchanged 1,066 high-pressure sodium lights for 1,174 new LED lights from Lumitex (image courtesy EastLink)

The two EastLink tunnels in Melbourne, Australia, have become the first major tunnels in Victoria state to be lit by LED lighting.

The 1.6km-long parallel Mullum Mullum and Melba tunnels enable vehicles up to 4.65m in height to pass under the Mullum Mullum Valley without affecting the wildlife and sensitive landscape. Each of the tunnels, at the northern end of EastLink (M3) in Melbourne's eastern suburbs, consists of three traffic lanes. They run up to 53m under Mullum Mullum Park in the suburb of Donvale.

The tunnels were recently closed to traffic during the four nights of upgrade work. Around 60 technicians using 22 scissor lifts exchanged 1,066 high-pressure sodium lights for 1,174 new LED lights from Lumitex, an Australian manufacturer based near Perth in the Australian state of Western Australia.

A spokesperson for EastLink noted that the four overnight tunnel were conducted during Melbourne’s fourth COVID lockdown. That meant that the traffic affected by the closures - and foregone tolls - was much less than originally anticipated.

As prime contractor for the A$1.5 million (US$1.16 million) project, Lumitex supplied the lights while sub-contracting installation to Keece Electrical Services as well as design and pre- and and post-implementation testing to Powerplant.

The EastLink spokesperson said that prior to the project, there was a trial of multiple vendors and LED products that included trial installations within the tunnels. This cost an additional A$300,000 (US$231,300) and led to Lumitex and its anL4D series being chosen as the preferred product.

EastLink said the new LED lights – the L4D series from Lumitex - are whiter and brighter than the old sodium lights, making passage through the tunnels easier and safer for drivers. Also, there is enhanced image quality in CCTV footage; emergency workers and incident response units in the tunnel are now operating in light that allows for greater natural vision of colours.

For example, if a motorist is injured in a vehicle collision, attending paramedics will find that the new brighter, whiter lighting will assist with their treatment of the injured person. Should there be a vehicle fire, Fire Rescue Victoria will have a brighter environment in which to operate their equipment.

Environmentally, the new lights consume around 26 per cent less energy which will cut greenhouse gas emissions by around 469 tonnes per year, according to EastLink. Tthe old lights will be recycled by an accredited specialist recycler.

The 40km EastLink is the largest tollway network in Victoria. It comprises EastLink itself, a 39km tollway that connects the Eastern, Monash, Frankston and Peninsula Link freeways. Meanwhile, Ringwood Bypass – a 1km un-tolled highway - connects EastLink to Maroondah Highway and Mount Dandenong Road.

EastLink is operated by ConnectEast, an Australian corporation that also  financed, designed and built the network. In 2018, EastLink allowed a televised live demonstration of automated driving along a section of the network.

For more information on companies in this article

Related Content

  • Australian tunnel contract preferred bidder
    July 20, 2021
    The preferred bidder has been selected for a key Australian tunnel contract.
  • VIDEO: Telstra drone LIDAR maps Melbourne’s EastLink Mullum Tunnel
    April 13, 2018
    One of the applications for LIDAR is to make high resolution 3-D maps. Self-driving cars are pre-loaded with a LIDAR map of the trials area in which they are permitted to fully self-drive themselves. The cars also have their own LIDAR scanner which captures a real-time LIDAR view of the vehicle’s surroundings. The fully autonomous driving system within these prototype cars compares the real-time LIDAR view against the pre-loaded LIDAR map to significantly increase the accuracy of their self-positioning
  • EastLink demonstrates hands-free driving in Melbourne
    April 10, 2018
    A motorway operator in Australia’s Victoria state has televised a live demonstration of automated driving along a section of one of its roads. The demonstration was along a route of the EastLink, an electronically tolled section of the M3 freeway through the eastern and south-eastern suburbs of Melbourne. EastLink is part of Melbourne's Metropolitan Ring Road project. ConnectEast is an Australian company responsible for the finance, design, construction and operation of EastLink which cost nearly US$2 bi
  • South Australia road corridor plan
    February 24, 2022
    South Australia has plans for a major road corridor project.