Skip to main content

First national study of US travel time reliability

Texas Transportation Institute (TTI) has published the 2011 Congested Corridors Report, the first nationwide effort to identify reliability problems at specific stretches of US highway responsible for significant traffic congestion at different times and different days. Researchers noted that the corridors included in the report were identified by the data itself.
April 30, 2012 Read time: 2 mins
RSS2347 Texas Transportation Institute (TTI) has published the 2011 Congested Corridors Report, the first nationwide effort to identify reliability problems at specific stretches of US highway responsible for significant traffic congestion at different times and different days. Researchers noted that the corridors included in the report were identified by the data itself.

5367 INRIX, a leading provider of traffic data and analytics, originated the corridor approach, using 10 hours of congestion per week to define a starting point for a congested corridor. To be considered a “corridor,” according to the Inrix standard adopted for this report, congestion should impact a freeway segment at least three miles long.

“Until now, we’ve been able to measure average congestion levels,” says TTI research engineer Bill Eisele, “but congestion isn’t an ‘average’ problem. Commuters and truckers are understandably frustrated when they can’t count on a predictable trip time from day to day.”

The report describes congestion problems in 328 seriously congested corridors over a variety of times — all day, morning and evening peaks, midday, and weekends. Not only were these roads found to have more stop-and-go traffic than others, they were also much less predictable — “so, not only does it take longer, commuters and truckers have a difficult time knowing how much longer it will take each time they make the same trip” said co-author David Schrank.

The 328 corridors, while accounting for only six per cent of the nation’s total freeway lane-miles in the US and 10 per cent of the traffic, account for 36 per cent of the country’s urban freeway congestion.

As the first look at travel time reliability across the US, researchers believe that the report can be useful in determining where transportation system improvements will have the greatest impact.

Click here for a copy of the report.

For more information on companies in this article

Related Content

  • Hitachi helps to build a better Stockholm
    November 19, 2024
    The ZE135 electric excavator has been put to the test on a high-profile development in the Stockholm Green Innovation District. This new growth area for technology and sustainability is being developed with the goal of renewing and building urban spaces with climate-smart solutions.
  • New concrete testing technologies improve speed, safety and quality
    July 8, 2016
    Developments in data processing and management are revolutionising the way concrete strengths can be measured and used to improve efficiencies - Kristina Smith reports on two new technologies A new system that uses thermal imaging to measure the strength of sprayed concrete tunnel linings is being trialled for the first time in London. The brainchild of Dr Benoit Jones, managing director of Inbye Engineering, the technique could lead to improvements in safety, quality and – in the longer run – productivi
  • Loads better weighing with Loadrite
    January 6, 2017
    Loadrite global marketing communications manager Simon Rush says the New Zealand firm’s on-board weighing systems for construction machines have been designed with operators in mind. “They take raw data and turn it into something really easy to understand,” said Rush. “Operators are only using one button 90% of the time, which means they are more likely to take up using them.” The Loadrite X-Weigh 2350, being exhibited at INTERMAT, can track overall tonnes and tonnes per hour throughout a construction proje
  • Loads better weighing with Loadrite
    April 18, 2012
    Loadrite global marketing communications manager Simon Rush says the New Zealand firm’s on-board weighing systems for construction machines have been designed with operators in mind. “They take raw data and turn it into something really easy to understand,” said Rush. “Operators are only using one button 90% of the time, which means they are more likely to take up using them.” The Loadrite X-Weigh 2350, being exhibited at INTERMAT, can track overall tonnes and tonnes per hour throughout a construction proje