The Blade is cutting edge in truck mounted attenuator technology

The Blade truck-mounted attenuator from the Verdegro Group has met the highest safety level - Manual for Assessing Safety Hardware. The AASHTO Manual for Assessing Safety Hardware (MASH) is the new set of regulations for crash-testing of safety hardware devices that are destined for use on the US National Highway System. It updates and replaces the 20-year old NCHRP Report 350. Verdegro also said that the Blade TMA was also nominated for the 2017 ATSSA innovation award, which took place just after World Hig
April 18, 2017 Read time: 2 mins
The Blade stands up to MASH safety standards
The Blade truck-mounted attenuator from the Verdegro Group has met the highest safety level - Manual for Assessing Safety Hardware. The AASHTO Manual for Assessing Safety Hardware (MASH) is the new set of regulations for crash-testing of safety hardware devices that are destined for use on the US National Highway System. It updates and replaces the 20-year old NCHRP Report 350.


8617 Verdegro also said that the Blade TMA was also nominated for the 2017 ATSSA innovation award, which took place just after 3260 World Highways went to press. The 2466 American Traffic Safety Services Association represents the road safety, traffic safety and highway safety industry in the US through legislative advocacy, traffic control safety training and member partnerships.

The MASH safety changes are mainly necessitated by alterations made to vehicles over the past decade. Cars have greatly increased in size, so updated regulations are required to keep occupants safe. For example, the average bumper height on light trucks has risen considerably since 1993, so previous highway safety designs are inadequate.

The new MASH standard sets stricter criteria for truck-mounted attenuators. Bigger and heavier and newer test vehicles must be used during testing. Upper and lower truck weight has to be tested, ballast has to be fixed, and also the arrow board together with the TMA construction must have to be tested. Additionally, offset and offset angel tests are now required in MASH.

This patented BLADE TMA has been full-scale crash-tested according to MASH 2009/2016 at the 2347 Texas Transportation Institute facility. All the ride-down values were within the preferred values.

Verdegro, based in Munnikenheiweg, the Netherlands, said the BLADE TMA will be available for the US market from April.

Road Markings, Barriers & Workzone Protection

Related Content

  • ARRB Systems' network-level continuous friction testing
    November 20, 2024
    Pavement safety assessments have traditionally focused on discrete low-density friction assessments using proven technology. But more detailed investigations and analysis are now feasible through improved technologies, explains Simon Tetley of ARRB Systems*.
    Read More
  • European Transport Safety Commission makes call for traffic safety boost
    July 10, 2015
    In 2013, 7,600 people died in road traffic while cycling or walking in European Union (EU) countries – the equivalent of a commercial airliner full of passengers being lost every week Because of this risk of death, the European Transport Safety Council (ETSC) wants vehicle manufacturers and local authorities to pay special attention to improving safety for cyclists, walkers and pedestrians. In a new report, the ETSC said the numbers being killed are falling more slowly than those for vehicle occupants. Over
    Read More
  • Cutting road crashes to save lives
    December 29, 2023
    Cutting road crashes can help save lives in the UK.
    Read More
  • Focusing on workzone safety systems
    March 16, 2012
    The US has seen a major reduction in deaths following accidents in its highway construction work zones, while Europe and other parts of the world are looking at new safety technology and systems to trigger a similar trend. Guy Woodford reports. Work in the US to reduce the likelihood of potentially fatal accidents at highway work zones is paying dividend.
    Read More

Highlighted Content