Skip to main content

Testing and striping underway for Seattle’s Alaskan Way tunnel

Crews have been working flat out on the Alaskan Way Tunnel in Seattle to install and test thousands of components and 90 interconnected systems. The client, Washing State Department of Transportation, said that Seattle Tunnel Partners began installation inside the double-deck State Route 99 tunnel in March after crews completed construction of the upper and lower roadways. STP said that testing could be complete by as early as late September and the tunnel could open as soon as this fall after an ap
August 31, 2018 Read time: 3 mins
Testing, testing: Seattle Tunnel Partners making sure that equipment and signage operates effectively in the soon-to-open Alaskan Way Tunnel in Seattle (photo courtesy WSDoT)
Crews have been working flat out on the Alaskan Way Tunnel in Seattle to install and test thousands of components and 90 interconnected systems.


The client, Washing State Department of Transportation, said that Seattle Tunnel Partners began installation inside the double-deck State Route 99 tunnel in March after crews completed construction of the upper and lower roadways.

STP said that testing could be complete by as early as late September and the tunnel could open as soon as this fall after an approximate three-week viaduct closure to realign the  SR 99 – called the Alaskan Way - into the new tunnel.

The project is called the Alaskan Way Viaduct Replacement Project after the section of SR 99 in Seattle called the Alaskan Way, a street running along the seafront. Part of the Alaskan Way is an aging 3.2km viaduct – opened in 1953 - which is being replaced by the 2.7km tunnel almost directly beneath it. This will free up waterfront area for major inner city development (see World Highways, %$Linker: 2 Internal <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 33214 0 link-external key project report false /categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false false%>, November 2017).

The multi-layered tests of the tunnel's operational and safety systems includes pre-functional tests to ensure working of individual equipment such as a sprinkler head. Functional tests check that the equipment works together as a system, for example multiple sprinklers. Finally, integrated testing checks that multiple systems function together - heat detectors and video cameras operate with the fire suppression system.

Striping of the road decks inside the tunnel is also continuing. The stripes separate a deck into two 3.3m lanes, a 2.4m shoulder on the left side and a 0.6m buffer on the right.

Kiewit Infrastructure West has started traffic signal, striping and roadway signage work to switch traffic on Alaskan Way from under the viaduct to the west of it. The viaduct will eventually be demolished after the tunnel is opened likely this fall.


Tunnel boring was completed last year by Bertha, the world’s largest diameter earth pressure balance tunnel boring machine at the time, with a cutterhead diameter of 17.5m. By the end of last year it had been dismantled, job completed.

Seattle Tunnel Partners - a joint venture of New York-based 4761 Dragados US (a subsidiary of Dragados, the construction division of ACS Group of Spain) and the general contractor Tutor Perini Corporation, based in California.

Apart from designing and building the tunnel - and owning Bertha - STP is responsible for building highway ramps and other connections at the north and south ends of the tunnel. STP is also constructing permanent buildings at the north and south portal to house lighting, ventilation and other essential tunnel systems

For more information about the Alaskan Way Viaduct Replacement Program, see the website:

%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external www.alaskanwayviaduct.org false http://www.alaskanwayviaduct.org/ false false%>

For more information on companies in this article

Related Content

  • Plans are in hand for a key UK parking exhibition
    December 13, 2012
    Plans are well in hand for the Traffex and Parkex exhibitions being held in the UK. This bi-annual event is now in its 26th year, is a three day exhibition combining two trade shows, Traffex and Parkex. Traffex is an international traffic engineering, road safety, parking and highway maintenance exhibition. Meanwhile Parkex is Europe’s largest dedicated parking exhibition. The events are co-located and will take place in Hall 5 at the NEC Birmingham from 16th – 18th April 2013. Traffex and Parkex 2013 are
  • Matest high production materials testing
    January 6, 2017
    Material testing equipment manufacturer Matest says its reputation for high production capacity, quality products, fast delivery times, and qualified technical support is acknowledged worldwide. The company offers advanced solutions for onsite and laboratory tests on bitumen, asphalt, concrete, cement, mortar, aggregates, rocks, soil, and steel, representing the ideal partner for anyone working in the construction and civil engineering industries. Its extensive range of material testing equipment is designe
  • Matest high production materials testing
    April 8, 2013
    Material testing equipment manufacturer Matest says its reputation for high production capacity, quality products, fast delivery times, and qualified technical support is acknowledged worldwide. The company offers advanced solutions for onsite and laboratory tests on bitumen, asphalt, concrete, cement, mortar, aggregates, rocks, soil, and steel, representing the ideal partner for anyone working in the construction and civil engineering industries. Its extensive range of material testing equipment is designe
  • Premiere for SBM’s REMAX 1112 MAXI mineral processor
    February 13, 2013
    Austrian company SBM Mineral Processing, a member of the MFL Group, is showing for the first time its new mobile mineral processing plant. Expanding its REMAX series with the 41tonne mobile track-mounted REMAX 1112 MAXI plant, it is said to offer a completely redesigned material flow making material jamming “a thing of the past.” The company says the discharge conveyor belt below the screen can be optionally fixed or swivelled by 180° increasing stockpile capacity five-fold and considerably improving logist