Potain’s new tower crane for global markets

Potain is launching its first hydraulic topless luffing jib crane, following tests on site with select dealers in Thailand, Australia and New Zealand. It is the first topless luffing jib model from Potain and its novel hydraulic technology is said to make it easier to assemble and faster to operate. Featuring new technology, the crane is said to combine the advantages of Potain’s MCR luffing jib cranes and MCT topless cranes. The machine is said to be straightforward to assemble and disassemble the crane
May 16, 2018 Read time: 3 mins
The new Potain MCH 125 tower crane is said to be easy and quick to erect
Potain is launching its first hydraulic topless luffing jib crane, following tests on site with select dealers in Thailand, Australia and New Zealand. It is the first topless luffing jib model from Potain and its novel hydraulic technology is said to make it easier to assemble and faster to operate.


Featuring new technology, the crane is said to combine the advantages of 5916 Potain’s MCR luffing jib cranes and MCT topless cranes. The machine is said to be straightforward to assemble and disassemble the crane on congested sites, suiting it to urban projects or job sites where space is limited.

Maximum capacity for the MCH 125 is 8tonnes, while the maximum jib length is 50m. Tip capacity is 2tonnes and maximum line speed is 100m/min when fitted with the 60 LVF 20 hoist. The crane’s design offers a number of advantages, including fast erection and dismantling. The topless design means less space is needed on site, as there is no cathead to assemble at ground level before installation.

The crane also uses Potain’s VVH hydraulic luffing technology for vertical movement of the jib, which eliminates the need for luffing wire ropes. With VVH technology, the MCH 125 is able to raise from a horizontal level to 87˚ in less than 2 minutes. The hydraulics are pre-connected at the factory, avoiding the need to perform this duty during on-site assembly.

The hydraulic luffing design means the crane has a shorter counter-jib and out-of-service radius when compared with rope-luffing alternatives, freeing up valuable space on congested job sites. The upperworks of the crane, including its full 50m of jib, can travel on just four trucks. Assembly to a height of 40m can be achieved in less than 6 hours.

Operation is said to be smooth and quiet; and for better utilisation for fleet owners it can be mounted on existing 1.6m or 2m mast sections from the manufacturer’s current range. Jib sections are from the MCR range of luffing jib cranes. There are five jib configurations available, ranging from 30m to 50m, in 5m increments.

The MCH 125 will be sold and supported through the extensive regional Potain dealer networks. The crane is available for sale throughout Asia, Africa, Oceania, the Middle East, Russia, the CIS countries and Latin America.

Road Structures

For more information on companies in this article

Related Content

  • Cat showcases road machines
    January 6, 2017
    Caterpillar Global Paving is exhibiting an array of machines at bauma China, which are aimed at applications in the Chinese and Asian markets The CB534 and CB534 XW twin drum compactors are designed for use in asphalt applications, with power from Caterpillar C3054 diesels rated at 97kW. Both models measure 4.93m long, with the CB534 weighing 10.4tonnes and featuring 1.7m wide drums while the CB534 XW weighs 11.3tonnes and has 2m wide drums. The hydrostatic drives feature two speed ranges of 0-7.3km/h and 0
    Read More
  • Cat showcases road machines
    November 26, 2012
    Caterpillar Global Paving is exhibiting an array of machines at bauma China, which are aimed at applications in the Chinese and Asian markets The CB534 and CB534 XW twin drum compactors are designed for use in asphalt applications, with power from Caterpillar C3054 diesels rated at 97kW. Both models measure 4.93m long, with the CB534 weighing 10.4tonnes and featuring 1.7m wide drums while the CB534 XW weighs 11.3tonnes and has 2m wide drums. The hydrostatic drives feature two speed ranges of 0-7.3km/h and 0
    Read More
  • Terex wins crane deals in Abu Dhabi and Qatar
    July 28, 2015
    Terex has scored crane deals in both Abu Dhabi and Qatar. Abu Dhabi-based Abu Nasir General Transport has now boosted its equipment fleet with the addition of a Terex AC 100/4L all-terrain crane. The machine joins an existing fleet of Terex cranes with capacities ranging from from 80 to 500tonnes. The company’s operations manager Asif Salim said, “At just 2.55m wide, it’s the most compact machine in its class, which is extremely important when working in confined spaces.” In the 100tonne capacity class an
    Read More
  • Predicting a big increase in asphalt production
    July 4, 2012
    With new roads to be built and existing ones to be maintained, one company is predicting a big increase in asphalt production Asphalt plant manufacturer Ammann says that four factors in particular will shape the future of the asphalt industry. The company, which has sold its first JustBlack asphalt mixing plant to Costa Rica through its Spanish distribution partner, EMSA, says that many more roads have yet to be built in the world. "Building the global road network will provide work for many generations to
    Read More

Highlighted Content