Skip to main content

Barge-mounted Manitowoc MLC300 lists Illinois bridge into place

The reduced footprint and floating counterweight meant that it is much more efficient for contractors to barge-mount a crawler crane. The crane can be on smaller water-based barges because the machine automatically adjusts its centre of gravity for each lift. Kraemer North America recently used an MLC300 to help replace an 84-year-old truss bridge, the 756m Savanna-Sabula Bridge near Savanna, in the US state of Illinois. The Savanna–Sabula Bridge was a truss bridge and causeway crossing the Mississippi Ri
June 28, 2018 Read time: 3 mins
A barge-mounted Manitowoc MLC300 at work on the new 750m-long Dale Gardner Veterans Memorial Bridge in Illinois
The reduced footprint and floating counterweight meant that it is much more efficient for contractors to barge-mount a crawler crane. The crane can be on smaller water-based barges because the machine automatically adjusts its centre of gravity for each lift.


Kraemer North America recently used an MLC300 to help replace an 84-year-old truss bridge, the 756m Savanna-Sabula Bridge near Savanna, in the US state of Illinois.

The Savanna–Sabula Bridge was a truss bridge and causeway crossing the Mississippi River to connect the city of Savanna, Illinois, with the island city of Sabula, Iowa. The bridge was decommissioned last November when its US$80 million replacement – only a few metres downstream – was opened as the 750m-long Dale Gardner Veterans Memorial Bridge.

Construction of the new bridge involved placing two 292m-long outer plate girder spans and a central 167m-long tied-arch span. Kraemer realised that a barge-mounted crane solution would be necessary to access the lifts for the tied-arch span.

The company sought consultation from Dawes Rigging & Crane Rental about a crane that could be mounted on the tight working quarters of a barge, but still provide high-capacity lifts to great heights to aid in bridge construction.

Many contractors use 2123 Manitowoc RINGER cranes for a barge-mounted solution because the round RINGER shape stabilises the crane and distributes the machine’s weight.

However, Dawes suggested a newer crane. “With the variable position counterweight, the MLC300 is always finding a new centre of gravity based on the load that’s on the hook,” said Patrick Shea, project manager for Kraemer.

“This crane has helped us to achieve almost zero list while working on the barge, keeping every lift level while minimising the barge’s rotation. The VPC saves space, too. Most crawler cranes with the required length of boom would not have fit on the barge in the first place,” said Shea.

The MLC300 was erected on a barge in the Mississippi River measuring just under 21.5m by 30m. It lifted arch rib sections weighing about 70tonnes to just over 50m using 90m of main boom. All was accomplished from a 30.5m radius.

To meet the lift radius and pick weight requirements on the job, Kraemer’s MLC300 had its optional VPC-MAX attachment. This enhances the crane’s capacity and enables additional boom and jib length combinations.

The stability of the MLC300, which Kraemer rented from Dawes Rigging & Crane Rental, was exceptional, said Shea. “The whole time we used the MLC300, the barge listed by less than a degree.”

The old Savanna–Sabula Bridge was finally demolished in March.

For more information on companies in this article

Related Content

  • Indeco cuts up New York City’s old Kosciuszko Bridge
    November 23, 2017
    An Indeco ISS 45/90 is proving essential for demolishing the old Kosciuszko Bridge in New York City. New York City’s old 1.9km Kosciuszko Bridge, which crosses Newtown Creek connecting Green Point, Brooklyn with Maspeth, Queens, has been out of service since April. By the end of the year, the polygonal Warren through-truss structure will be no more. To replace the old bridge, in 2009, the New York State Department of Transportation planned the construction of two cable-stayed replacement bridges.
  • Terex Superlift 3800 crane rises to the challenge in Alsace
    May 14, 2015
    Crane service provider Sarens has used a Terex Superlift 3800 lattice boom crawler crane to lift a pedestrian and bicycle steel bridge over the A4 Autoroute near Schiltigheim, in the Aisace region of France. The job was out of the ordinary, according to the Sarens Group, a transport and specialised rigging specialist based in Wolvertem, Belgium. “We didn’t have a special permit for a heavy-load transport with the required weight,” said Sarens project manager Joost Elsen.
  • Manitowoc sees strong market in Egypt
    January 5, 2017
    Manitowoc recently held a conference in Egyptian capital Cairo, in partnership with its long-standing dealers Orascom Trading and International Development Programmes (IDP). The event highlighted the company’s latest products and innovations, underlining its commitment to markets such as Egypt and the Middle East, according to the firm. And the conference also concluded with the sale of the first four MDT389 cranes in the Middle East.
  • Building a replacement bridge in record time
    March 13, 2023
    The construction of a new bridge in Pittsburgh, Pennsylvania to replace a collapsed structure has been carried out in record time