Barge-mounted Manitowoc MLC300 lists Illinois bridge into place

The reduced footprint and floating counterweight meant that it is much more efficient for contractors to barge-mount a crawler crane. The crane can be on smaller water-based barges because the machine automatically adjusts its centre of gravity for each lift. Kraemer North America recently used an MLC300 to help replace an 84-year-old truss bridge, the 756m Savanna-Sabula Bridge near Savanna, in the US state of Illinois. The Savanna–Sabula Bridge was a truss bridge and causeway crossing the Mississippi Ri
June 28, 2018 Read time: 3 mins
A barge-mounted Manitowoc MLC300 at work on the new 750m-long Dale Gardner Veterans Memorial Bridge in Illinois
The reduced footprint and floating counterweight meant that it is much more efficient for contractors to barge-mount a crawler crane. The crane can be on smaller water-based barges because the machine automatically adjusts its centre of gravity for each lift.


Kraemer North America recently used an MLC300 to help replace an 84-year-old truss bridge, the 756m Savanna-Sabula Bridge near Savanna, in the US state of Illinois.

The Savanna–Sabula Bridge was a truss bridge and causeway crossing the Mississippi River to connect the city of Savanna, Illinois, with the island city of Sabula, Iowa. The bridge was decommissioned last November when its US$80 million replacement – only a few metres downstream – was opened as the 750m-long Dale Gardner Veterans Memorial Bridge.

Construction of the new bridge involved placing two 292m-long outer plate girder spans and a central 167m-long tied-arch span. Kraemer realised that a barge-mounted crane solution would be necessary to access the lifts for the tied-arch span.

The company sought consultation from Dawes Rigging & Crane Rental about a crane that could be mounted on the tight working quarters of a barge, but still provide high-capacity lifts to great heights to aid in bridge construction.

Many contractors use 2123 Manitowoc RINGER cranes for a barge-mounted solution because the round RINGER shape stabilises the crane and distributes the machine’s weight.

However, Dawes suggested a newer crane. “With the variable position counterweight, the MLC300 is always finding a new centre of gravity based on the load that’s on the hook,” said Patrick Shea, project manager for Kraemer.

“This crane has helped us to achieve almost zero list while working on the barge, keeping every lift level while minimising the barge’s rotation. The VPC saves space, too. Most crawler cranes with the required length of boom would not have fit on the barge in the first place,” said Shea.

The MLC300 was erected on a barge in the Mississippi River measuring just under 21.5m by 30m. It lifted arch rib sections weighing about 70tonnes to just over 50m using 90m of main boom. All was accomplished from a 30.5m radius.

To meet the lift radius and pick weight requirements on the job, Kraemer’s MLC300 had its optional VPC-MAX attachment. This enhances the crane’s capacity and enables additional boom and jib length combinations.

The stability of the MLC300, which Kraemer rented from Dawes Rigging & Crane Rental, was exceptional, said Shea. “The whole time we used the MLC300, the barge listed by less than a degree.”

The old Savanna–Sabula Bridge was finally demolished in March.

Road Structures

For more information on companies in this article

Related Content

  • Concrete runway paving in the US
    December 15, 2017
    A new Wirtgen SP 94i slipform paver has helped deliver the successful reconstruction of a runway in the US state of Missouri. With more than 30,000 take-offs and landings a year, Jefferson City Memorial Airport (JEF) is one of the most heavily frequented airports in Missouri. Thousands of visitors travel through it every day on their way to the government and congress offices in the state capital on the Missouri River. At the end of April 2016, work commenced on the reconstruction of a runway approximately
    Read More
  • Toggenburger takes two Terex cranes to tackle a Swiss tandem lift
    August 21, 2015
    Two of the largest cranes in Switzerland recently were called upon to lift an 884tonne, 162m-long connecting bridge between two buildings at the Coop distribution centre in Schafisheim. “The individual bridge components had enormous gross weights of up to 275tonnes and required us to use working radii of up to 29m,” said Andre Huber, project manager at Toggenburger, the company that took on the task. To get the job done, Toggenburger rolled out its biggest machinery which also happen to be the two lar
    Read More
  • Foundations for Mexico highway with help from Liebherr
    November 9, 2017
    A Liebherr rotary drill rig and oscillator combination has been working in Mexico on a highway project for contractor Mota-Engil. A Liebherr piling rig is playing an important role on a major Mexican highway construction project being carried out by a division of the Portuguese firm Mota-Engil. The use of the rig by Mota-Engil Mexico’s newly formed geotechnical division is helping to set new quality standards for piling in the country. The contractor is leasing one of the latest Liebherr LB 24-270 rotary
    Read More
  • Manitowoc launches Grove GMK5150 crane
    April 19, 2016
    Manitowoc’s all-terrain crane portfolio has been extended with the launch of the five-axle Grove GMK5150 and GMK5150L. These 150tonne capacity cranes feature a compact design over the models the GMK5130-2 and GMK5110-1 they replace. Maximum counterweight for the GMK5150 and GMK5150L is 45tonnes and is said to help both models achieve an overall load chart increase of 20% over their predecessors. Up to 10.2tonnes of counterweight can be carried by the GMK5150 in its taxi set-up - when configured with a gross
    Read More

Highlighted Content