Skip to main content

Key A14 upgrade for the UK to cut congestion

A joint venture comprising BAM Nuttall and Morgan Sindall will carry out the 4km widening of the UK’s heavily congested A14 route. The €28.5 million (£24 million) project is being carried out for the Highways Agency to reduce journey times more reliable, improve safety and support proposed local development. Mott MacDonald will carry out the design work for the project. Junctions 7-9 of the A14 are highly congested at present due to a combination of heavy commuter traffic and the high percentage of HGVs car
September 11, 2013 Read time: 2 mins
A joint venture comprising 3137 BAM Nuttall and 2567 Morgan Sindall will carry out the 4km widening of the UK’s heavily congested A14 route. The €28.5 million (£24 million) project is being carried out for the 2309 Highways Agency to reduce journey times more reliable, improve safety and support proposed local development. 2579 Mott MacDonald will carry out the design work for the project. Junctions 7-9 of the A14 are highly congested at present due to a combination of heavy commuter traffic and the high percentage of HGVs carrying freight to and from the nearby port of Felixstowe. The widening scheme will provide an extra lane in each direction within the existing highway boundary between Junction 7 (A43N) and Junction 9 (A509) of the A14 Kettering Bypass. Mott MacDonald’s design retains as many existing features as possible and minimises the use of large construction machinery. This design includes the retention of drainage, safety barriers and lighting within the central reserve where possible and new concrete retaining structures which will be filled with excavated material from site to negate the import of material. Mott MacDonald’s design is due to be finished by the start of 2014, initial construction work on the scheme is due to begin in autumn 2013 and be fully completed by spring 2015.

For more information on companies in this article

Related Content

  • England road upgrades planned
    June 14, 2021
    A road upgrade programme is planned for the East of England.
  • New UK road link planned
    August 25, 2020
    A new UK road project is being planned.
  • New concrete barrier on key M5 motorway section
    October 30, 2012
    Contractor Tarmac has carried out major works on the UK’s M5 motorway after recycling around 30,000tonnes of concrete and providing 8,000m3 of new concrete for new slip-form central barrier works. The project, between Junctions 3 and 4a of the M5, was delivered as part of an eight-week scheme to install 13km of new concrete safety barrier. Approximately 30,000 tonnes of concrete were excavated and then crushed into Type 1 and 6F5 aggregates at Tarmac’s recycling site in Ettingshall, Wolverhampton. Over 14,0
  • Mott MacDonald to design highway improvements in Czech Republic
    August 6, 2015
    Mott MacDonald has been appointed by the Road and Motorway Directorate of the Czech Republic to design sections of the R35 and R55 expressways. R35 connects the Bohemia and Moravia regions and runs parallel to the D1 motorway, the longest in the country. Mott MacDonald will design a 5.8km section of the expressway, including three bridges, two interchanges, two roundabouts, four overpasses and one railway viaduct. One watercourse will also be relocated as part of the scheme.