Skip to main content

First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

For more information on companies in this article

Related Content

  • Liebherr updates its R922 crawler excavator with more power
    January 6, 2017
    Liebherr is launching a revised R922 crawler excavator, replacing the previous R906 and joining the R918 and R926 in the company’s medium weight line-up. Powered by a Stage IIIB Liebherr diesel engine, developing 105kW (143hp), the R922 weighs in at 22 tonnes and designed as a general purpose civils machine. Using a Dual Circuit Positive Control hydraulic system, the excavator is said to consume less energy than previous models, resulting in fuel savings for the customer. The machine on show will be exhibit
  • Liebherr updates its R922 crawler excavator with more power
    February 8, 2013
    Liebherr is launching a revised R922 crawler excavator, replacing the previous R906 and joining the R918 and R926 in the company’s medium weight line-up. Powered by a Stage IIIB Liebherr diesel engine, developing 105kW (143hp), the R922 weighs in at 22 tonnes and designed as a general purpose civils machine. Using a Dual Circuit Positive Control hydraulic system, the excavator is said to consume less energy than previous models, resulting in fuel savings for the customer. The machine on show will be exhibit
  • E-Z Drill’s 210B-2 SRA hits the target
    November 30, 2017
    E-Z Drill’s 210B-2 SRA concrete drill maximises accuracy in concrete drilling projects without disturbing the subgrade. The company says that the two-gang slab-rider drill is easily manoeuverable making it ideal for drilling hundreds of holes for lane additions, airport work and full depth repair projects. Its compact frame makes the drill well suited for jobs with cramped worksites that also require drilling slabs with a range of thickness. The compact frame makes the drill well suited for jobs wit
  • New wheeled loader is being offered by Dressta
    February 8, 2013
    Dressta is offering improved versions of its 560E and 555C Extra wheeled loaders, with new Cummins diesels. Power for the larger 560E Extra now comes from a Cummins QSX15 diesel rated at 319kW, compared with the 310kW of the previous engine in this machine. The six cylinder Cummins engine drives through a torque converter, a three-speed, full powershift, countershaft transmission, front and rear axle drives and conventional differentials.