Skip to main content

First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

For more information on companies in this article

Related Content

  • Bonfiglioli opts for AC/DC electric drum drive for truck mixers
    April 18, 2013
    Bonfiglioli has developed an electric drum drive for the new hybrid truck mixer from CIFA, the concrete equipment specialist owned by Chinese manufacturer Zoomlion. The 500 series drum drive with electric motor offers drum rotation speeds from 15-22rpm and is suited to mixer capacities from 6-14m3. The drivetrain relies on an AC induction motor to turn the drum, which gets its power from an on-board battery pack. The electric drum drive can also be powered by mains electricity – the latter can be plugged in
  • Log on to Webtec
    March 8, 2012
    Webtec Products will be showcasing new products at INTERMAT - the HPM6000 hydraulic data logger with Intelligent Digital flow and pressure sensors, and the RFIK series of portable hydraulic testers.
  • Intermat launch for Liebherr wheeled excavators
    January 6, 2017
    2012 sees the start of a new wheeled excavator programme from Liebherr, and the A916 represents the first fruit from the project. Replacing the A316 Litronic, the new A916 has been developed to meet Stage IIIB emissions requirements and has an operating weight from 17-18.1 tonnes depending on specification. Power comes from a four-cylinder 110kW engine with common rail fuel injection, EGR and DOC – a DPF is available as an optional extra for those working inside buildings.
  • Intermat launch for Liebherr wheeled excavators
    March 19, 2012
    2012 sees the start of a new wheeled excavator programme from Liebherr, and the A916 represents the first fruit from the project. Replacing the A316 Litronic, the new A916 has been developed to meet Stage IIIB emissions requirements and has an operating weight from 17-18.1 tonnes depending on specification. Power comes from a four-cylinder 110kW engine with common rail fuel injection, EGR and DOC – a DPF is available as an optional extra for those working inside buildings.