Skip to main content

First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

For more information on companies in this article

Related Content

  • Start of Torrens section upgrade of Adelaide’s North-South Corridor
    August 12, 2015
    Work is underway in the Australian city of Adelaide on a US$657 million upgrade of the Torrens Road to River Torrens section of the North-South Corridor. Nearly 500 workers will eventually be on site to upgrade the 3.7km section of road, of which 3km will be made into a non-stop roadway. The project includes a 2km section of non-stop lowered motorway as well as an overpass for the city’s Outer Harbour rail line. Contractors will deliver six intersection upgrades as well as improved cycling and pedestr
  • Construction made E-Z
    January 6, 2017
    American firm E-Z Drill is keen to make the most of its INTERMAT debut by securing more European dealers for its range of drilling and dowelling systems. “We have a very good dealer in the UK, one in the Netherlands and one in Spain and we hope to talk to French equipment dealers this week,” said E-Z Drill vice president Randy Stevens. E-Z Drill has had previous experience of major European construction shows after attending previous Bauma events, although its plans to exhibit at the 2010 show were thwarte
  • Construction made E-Z
    April 17, 2012
    American firm E-Z Drill is keen to make the most of its INTERMAT debut by securing more European dealers for its range of drilling and dowelling systems. “We have a very good dealer in the UK, one in the Netherlands and one in Spain and we hope to talk to French equipment dealers this week,” said E-Z Drill vice president Randy Stevens. E-Z Drill has had previous experience of major European construction shows after attending previous Bauma events, although its plans to exhibit at the 2010 show were thwarte
  • Innovative concrete pre-casting technology from Exclusivas Resimart Ibérica
    January 6, 2017
    Spanish specialist Exclusivas Resimart Ibérica is developing novel equipment for the production of pre-stressed concrete elements. The company has designed new technologies for pre-cast concrete markets, mainly in precast pre-stressed concrete by vibro-compression technology and extrusion systems.