Skip to main content

Demolition starts on Seattle’s Alaska Way Viaduct

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle is underway, including the filling in of a redundant road tunnel.
June 14, 2019 Read time: 2 mins
Coming down: Demolition of Seattle’s Alaska Way Viaduct, a 1950’s structure, began this winter (pic courtesy Philip Renaud)

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle in Washington State is underway, including the filling in of a redundant road tunnel.

Demolition contractor Kiewit Infrastructure West picked up the contract estimated at around US$94 million, according to media reports. Work is expected to take up to two years and includes filling in the Alaska Way’s Battery Street Tunnel.

For each segment of the viaduct, the contractor is removing the road decks, then girders and crossbeams and finally the support columns. During demolition, barriers are installed to protect nearby buildings and water is sprayed on the work to keep down dust.

Tunnel work includes decommissioning and removing the utility and mechanical systems, removal of hazardous material from the tunnel and, when finished, the sealing of the two entrances.

Kiewit decided against using conveyor belts to move the material into the Battery Street Tunnel. Instead, rubble is trucked to a nearby sorting area where rebar is removed. The material is crushed into small piece and loaded onto side-dumping trucks that carry the debris to openings along the tunnel route that lead directly down into the tunnel itself. The trucks dump the material into a steel funnel over the openings and down it goes into the tunnel. It takes less than a minute for the material to crash down into the tunnel where it is then levelled out by workers. Vibratory rollers spread and compact the material in layers.

Prior to the demolition work, there were public petitions to keep the Battery Street Tunnel open for pedestrian and bicycle use. However, the Washington State Department of Transportation decided that the structure, in need of repair,  would have been extremely expensive to upgrade to modern seismic standards – an important feature for any structure along the west coast of the US and up into Canada. The region lies along the infamous San Andreas Fault making it prone to earthquakes.

The new Alaska Way’s tunnel lies directly under the old viaduct and was the subject of a World Highways Key Project Report in 2017.

<%$Linker:

2

External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false false%>

 

Related Content

  • Hitachi Sumitomo’s European launch of new SCX1500A-3 hydraulic crawler crane
    February 11, 2013
    Hitachi Sumitomo Heavy Industries Construction Crane Company (HSC) says its new 150tonne capacity SCX1500A-3 hydraulic crane, being unveiled at bauma, has features to enhance its sustainability, mobility, performance and safety. Said to be suitable for construction, material handling and civil engineering applications, the SCX1500A-3 has been manufactured to comply with Stage IIIB emission regulations. Equipped with a powerful new-generation 210kW Isuzu engine, the sustainability of the 150tonne x4.5m lifti
  • Caterpillar is offering a new compact paver in the shape of the AP255E
    January 6, 2017
    Caterpillar Paving’s new AP255E is the smallest paver in the range. With a single operator, the compact AP255E meets all requirements for small and medium sized jobsites in urban centres such as pathways, cycle paths, playgrounds, trench back filling and all maintenance and repair work. The paver is designed to operate in limited spaces, due to its compact design and exceptional manoeuvrability. The AP255E is powered by a Cat C2.2 engine delivering 34kW, weighs 4.5tonnes and has a standard paving width of 1
  • Caterpillar is offering a new compact paver in the shape of the AP255E
    March 21, 2012
    Caterpillar Paving’s new AP255E is the smallest paver in the range. With a single operator, the compact AP255E meets all requirements for small and medium sized jobsites in urban centres such as pathways, cycle paths, playgrounds, trench back filling and all maintenance and repair work. The paver is designed to operate in limited spaces, due to its compact design and exceptional manoeuvrability. The AP255E is powered by a Cat C2.2 engine delivering 34kW, weighs 4.5tonnes and has a standard paving width of 1
  • Penta’s custom-made plant flexibility
    April 8, 2013
    Penta Automazioni Industriali says it began trading in 1991 in response to increased demand for automation in the handling, stacking, sorting and ageing of concrete elements. The company provides custom-made plants and, through a close relationship with customers, Penta says it is able to continuously improve its products and adapt them to constantly changing market demands.