Products

The latest complement to Atlas Copco’s range of hydraulic attachments is the Hydro Magnet, a range of profitable tools for recycling plants, scrapyards and the demolition industry. Hydro Magnets enable valuable iron and steel to be separated quickly and easily from concrete waste for subsequent recycling. Simply installed on the existing grapple or shear installation, they require no extra generator or electro cable on the carrier. Two Hydro Magnets are available in two versions, as a fixed magnet (F),

VW has finally stopped production of its famous Kombi bus in Brazil. Production started at the Brazilian factory at Anchieta in 1957 but the vehicle no longer meets South American requirements for passenger safety. New laws require it to feature airbags and ABS braking but these cannot be fitted to such an old design and instead, VW has opted to stop production at last. In Europe the VW Kombi bus is sought after by collectors and good examples can attract high prices. But in Brazil the vehicle remains relat

In Iceland, work on a road construction project was halted over fears that this would cause upset to the elves present in the area. The local council stepped in as work got underway, showing concern that the road building activity would scare away the elves and bring poor fortune to the region. A firm decision was taken, to stop the road building and leave the elves in peace. Trolls however commented adversely on the internet on the grounds for the decision.

Two Lego enthusiasts have used their enthusiasm for the versatile plaything to build a full scale car. The vehicle is able to be driven as well and can attain speeds of up to 20-30km/h using its compressed air motor. Its builders say they were wary of attempting to drive it at a higher speed in case it fell apart. The open top car is made of some 500,000 pieces of Lego and feaures a novel four bank, radial engine design powered by compressed air with no less than 256 pistons. Only the wheels and a few load

In New York, a pilot and his two passengers had a lucky escape when the engine of their light aircraft failed. And road construction workers played a key role in ensuring that there were no casualties in the incident. When the road crew spotted the Piper Cherokee gliding in, dead stick, towards the Major Deegan Expressway they realised what was about to happen and parked their vehicles so as to halt traffic on the busy roadway. The rapid descent meant that the pilot brought the aircraft down hard onto the s

A police officer in New Zealand feels that he has now seen rather too much in his job. The officer was on patrol when he overtook a man on a scooter driving with his underwear lowered to ankle height. The police officer pulled the scooter rider over to the side of the road, then asked him to pull up the underwear. When asked to explain the offence, the rider said that he was benefiting from air cooling on the exposed area, whilst in motion. The rider told the officer that he had ridden from his workplace al

The new Cat 966M, 966M XE, 972M (pictured), and 972M XE Wheeled Loaders meet EU Stage IV emissions standards, and are said to offer considerable additional value including greater productivity, lower fuel consumption, improved operator efficiency and Cat Connect features. The four models have C9.3 ACERT engines equipped with a combination of proven electronic, fuel, air and after treatment components. Deep system integration is said to result in reduced emissions, improved performance and improved fuel

Chicago Pneumatic (CP) has unveiled its comprehensive new concrete equipment range. In applications from walls to floor slabs, the range has products to cover every step of the job, from vibration and levelling to finishing and cutting. Freshly poured concrete has air voids which must be removed by vibration to increase its density and finished strength. Depending on the concrete’s depth and slump, this can be achieved using a poker or screed. Customers can now choose mechanical, electric or pneumatic p

JAI, a leading manufacturer of vehicle imaging systems and components, exhibited its VISCAM 1000 system at Intertraffic in Amsterdam. The new high resolution all-in-one imaging system for video tolling, tolling enforcement, congestion charging, red light and speed enforcement, is said to incorporate the latest high performance video triggering technology, light sensing, dynamic range control, and other technologies designed to maximise the quality of the images produced for automated number plate reading (A

It is the bugbear of motorists worldwide, and costs UK councils alone an estimated US$82.12 million (£50 million) in compensation each year. Now Balfour Beatty is partnering with specialist supplier Velocity and North Somerset Council in south-west England to tackle potholes using innovative technology which vastly reduces disruption to road users. The method, called ‘Spray Injection’ patching, is allowing Balfour Beatty to repair nearly 700 potholes a week on its highways maintenance contract repairing

The Leica GMX901plus is said by the Swiss firm to be an “affordable and rugged” GNSS receiver that delivers precise and reliable data about movements of sensitive structures such as mine walls, rock slopes, dams, and buildings. For time-critical applications that require high rate data and a higher accuracy the GMX901plus can be smoothly upgraded to a powerful L1/L2 GPS/GLONASS receiver with an update rate of 5Hz.

Topcon Positioning Group says its new BIM solution - the LN-100 – is the world’s first 3D positioning system designed specifically for construction layout. Said to offer seamless integration and flow of project data from the design to the field, the LN-100 is simple to operate, removing “the intimidation factor and reducing the learning curve in performing construction layout tasks,” according to Eduardo Falcon, Topcon Positioning Group executive vice president and general manager for the GeoPositioning