Terex and Webasto keep rigid dump trucks hot in deepest winter

Terex Trucks has launched extreme winter protection kits for its rigid dump trucks to avoid keeping engines idling in extreme sub-zero temperatures. In its standard deliverable configuration, a Terex Trucks’ rigid hauler is designed to safely operate in conditions down to -18°C, explains Scott Pollock, product manager at Terex Trucks. But with the help of aftermarket heating specialist Webasto, this limit is greatly extended. Webasto’s Winter Kit defends trucks where temperatures fall to -25°C while the
April 10, 2017 Read time: 2 mins
Terex and Webasto take the pain out of tumbling temperatures
8081 Terex Trucks has launched extreme winter protection kits for its rigid dump trucks to avoid keeping engines idling in extreme sub-zero temperatures.

In its standard deliverable configuration, a Terex Trucks’ rigid hauler is designed to safely operate in conditions down to -18°C, explains Scott Pollock, product manager at Terex Trucks. But with the help of aftermarket heating specialist Webasto, this limit is greatly extended. Webasto’s Winter Kit defends trucks where temperatures fall to -25°C while the Arctic Kit enables safe operating up to -40°C.

General practice in colder countries is to keep engines constantly running - even during shift changes - to keep fluids warm, prevent fatigue failures in the drivetrain and seal leaks. Webasto’s truck-mounted Thermo-Heater reduces fuel consumption, engine wear-and-tear and prolonged downtime due to cold-induced mechanical issues.

Webasto say that the new technology makes use of an environment-friendly start-stop system that needs only a very small trickle of diesel. The Thermo-Heater is powered once the engine is shut down, it then draws the coolant from the engine and circulates around critical components. The engine-independent heater keeps the machine at a predetermined warmer temperature for hours after the motor is switched off, making engine restart more reliable.

Additionally, Webasto’s heater makes an operator’s life more comfortable. It supports the standard in-cab heater and there’s the added heated operator-seat.

Kits are fitted at the Motherwell factory in Scotland and are available on the TR45, TR60, TR70 and the 91tonne capacity TR100. They can be retrofitted also on older machines and are covered on the Terex Trucks protection warranty. “The newly designed kits will be offered globally,” says Pollock.

For more information on companies in this article

Related Content

  • Bell’s new truck offers increased capacity
    April 15, 2016
    A key introduction coming from Bell Equipment is its highly productive, high capacity ADT. The new B60E is intended to compete in the market with smaller rigid haulers and is aimed at use in large quarry applications. Running on twin axles the truck has double tyres at the rear and is powered by an MTU diesel, while it offers a capacity of 60tonnes. Its rear dump body has been designed to be short and square in configuration, unlike conventional ADTs that tend to have longer bodies. The reason for this desi
    Read More
  • Dynapac develops asphalt remixing system
    September 30, 2015
    Atlas Copco is now introducing its Dynapac Remixer, which is designed to deliver a high quality, homogeneous asphalt mix The unit has been designed to fit inside the hopper of a paver and can help boost mat quality. Research shows that thermal and mechanical segregation of the asphalt mix can trigger problems in the mat including unevenness and irregular surfaces, a larger void content and reduced compaction. These issues can cause long-term problems and will shorten the service life of the paved surf
    Read More
  • Material feeder boosts paving job in South Africa
    December 14, 2017
    The use of a material feeder in a road paving job in South Africa has helped increase productivity and quality on the project. The contractor employed a Vögele MT 3000-2 Offset PowerFeeder to help optimise pavement quality, with the positive paving results having been confirmed by the University of Twente, Netherlands. This body monitored the project from a scientific perspective and its equipment included RoadScan, the innovative temperature-measurement system from Vögele. Using a material feeder can
    Read More
  • The payload answer for ADT haulage?
    July 8, 2016
    Will increased ADT load capacity provide a suitable solution to increasing aggregate and earthmoving haulage needs? Mike Woof reports The rule of thumb with off-highway machinery is that for bulk operations, larger equipment can deliver economies of scale, with bigger payloads allowing a better cost/tonne. Heavier machines may be less versatile than more compact units, so a type of equipment that retains its versatility as it is scaled up in size can offer major benefits. For the articulated dumptruc
    Read More

Highlighted Content