Skip to main content

Sullair unveils 400, 1600 cubic foot per minute air compressors

Sullair introduced new large and small portable compressed air units at CONEXPO-CON/AGG. The 1600H has a Tier 4 Final engine to give a compression rating of 1600 cubic foot per minute (CFM) at 100 to 150 pounds per square inch (psi).
March 8, 2017 Read time: 2 mins

8590 Sullair introduced new large and small portable compressed air units at CONEXPO-CON/AGG.

The 1600H has a Tier 4 Final engine to give a compression rating of 1600 cubic foot per minute (CFM) at 100 to 150 pounds per square inch (psi). Compared with the company's previous models, it is 20% smaller and 2,500  pounds lighter for easier manoeuvrability, storage, handling and transit. It is fitted with fork lift pockets and two units will fit comfortably on a standard flatbed or drop-deck trailer. The unit offers 10% lower overall fuel consumption compared with previous models, with up to 10 hours uninterrupted run time – longer than the average workshift.

A notable innovation with the new unit is a 7-inch durable touchscreen controller, which can be operated with gloved hands. It can be towed at 65mph. Servicing is improved by swing doors that give easier access to the engine.

The 400H small compressor has a Cummins QSF3.8 diesel engine and offers variety of flow and pressures up to 400 cfm and 150 psi. Like the 1600H, the 400H offers up to 10 hours’ runtime. For maintenance, Sullair offers 50-, 250- and 500-hour service kits, which include replacement parts for each interval.

To better support its product range, Sullair now makes a 'brand promise' that it will maximise reliability, durability and performance. “Uptime is critical – contractors expect machines to work harder these days,” says Russell Warner, vice president, rental and infrastructure at Sullair. The company has also introduced what it calls its Reman Program, whereby it will 'remanufacture' used machines, bringing them back to full operational conditions for resale, and a Recon Program, whereby the company will recondition units to customers' specific requirements.

For more information on companies in this article

Related Content

  • New Doosan Portable Power compressor and generator models
    May 24, 2013
    Doosan Portable Power was due to showcase its new compressor and generator products for the  rst time in the UK in a special ‘Portable Power’ section of the Doosan Construction Equipment stand at Plantworx in Warwickshire, central England. The Stage IIIB compliant 9/305 large portable compressor and the G100-IIIA Stage IIIA compliant generator were set to be among the models at the 14-16 May 2013 show. The stand was also due to feature the new extended ‘Tough Top’ range of portable compressors and lighting
  • The Quill Falcon Cyclone 60 Trailer system is a blast
    July 3, 2019
    The Quill Falcon Cyclone 60 Trailer water blasting system efficiently removes road markings and anti-skid coatings without scorching or scarring highway surfaces. According to the manufacturer, the portable Falcon Cyclone 60 is the most convenient of the Quill Falcon range because it comprises a Quill Falcon Cyclone 60 unit, a 115litre water tank and a 90cfm or 140cfm compressor. It provides everything contractors need to start blasting almost immediately. Applications include the removal of permanent and
  • Power, stability and control with new Case 8 WX Series
    January 21, 2013
    Case Construction Equipment has unveiled the first three models in an improved range of wheeled excavators: the WX148, WX168 and WX188. The machine trio are said to benefit from the power and performance of a three-pump hydraulic system, with a dedicated swing pump, a new engine speed/working mode selection dial, a heavy-duty undercarriage and an improved operator’s cab. The revisions are also said by Case to result in improved operator comfort and ease of operation, excellent service accessibility and redu
  • Advanced, low emission, fuel efficient earthmoving
    February 23, 2012
    Manufacturers are rolling out sophisticated machines for the European, North American and Japanese markets - Mike Woof reports. This year has been a pivotal period for the development of advanced, low emission earthmoving machines. During 2011 an array of manufacturers have introduced new models designed to comply with the latest Stage IIIB/Tier 4 Interim emissions regulations introduced for