Skip to main content

Sullair unveils 400, 1600 cubic foot per minute air compressors

Sullair introduced new large and small portable compressed air units at CONEXPO-CON/AGG. The 1600H has a Tier 4 Final engine to give a compression rating of 1600 cubic foot per minute (CFM) at 100 to 150 pounds per square inch (psi).
March 8, 2017 Read time: 2 mins

8590 Sullair introduced new large and small portable compressed air units at CONEXPO-CON/AGG.

The 1600H has a Tier 4 Final engine to give a compression rating of 1600 cubic foot per minute (CFM) at 100 to 150 pounds per square inch (psi). Compared with the company's previous models, it is 20% smaller and 2,500  pounds lighter for easier manoeuvrability, storage, handling and transit. It is fitted with fork lift pockets and two units will fit comfortably on a standard flatbed or drop-deck trailer. The unit offers 10% lower overall fuel consumption compared with previous models, with up to 10 hours uninterrupted run time – longer than the average workshift.

A notable innovation with the new unit is a 7-inch durable touchscreen controller, which can be operated with gloved hands. It can be towed at 65mph. Servicing is improved by swing doors that give easier access to the engine.

The 400H small compressor has a Cummins QSF3.8 diesel engine and offers variety of flow and pressures up to 400 cfm and 150 psi. Like the 1600H, the 400H offers up to 10 hours’ runtime. For maintenance, Sullair offers 50-, 250- and 500-hour service kits, which include replacement parts for each interval.

To better support its product range, Sullair now makes a 'brand promise' that it will maximise reliability, durability and performance. “Uptime is critical – contractors expect machines to work harder these days,” says Russell Warner, vice president, rental and infrastructure at Sullair. The company has also introduced what it calls its Reman Program, whereby it will 'remanufacture' used machines, bringing them back to full operational conditions for resale, and a Recon Program, whereby the company will recondition units to customers' specific requirements.

For more information on companies in this article

Related Content

  • Båsum Boring’s Atlas Copco DrillAir Compressor
    June 24, 2013
    Since the Stage IIIB emissions standards went into effect in Janauary 2011 throughout most of Europe, portable compressor manufacturers have developed different technologies to comply with the directives. With its latest DrillAir order, the Norwegian drilling company Båsum Boring was the first to purchase a Stage IIIB-compliant Atlas Copco compressor. “We have been using Atlas Copco compressors for years and we like their reliability and service level. For Stage IIIB machines, we looked at other suppliers,
  • CONEXPO-CON/AGG industry education
    July 27, 2016
    The organisers of the CONEXPO-CON/AGG and IFPE exhibition from March 7th-11th 2017 are offering attendees in-depth industry education. In addition to exhibits, CONEXPO-CON/AGG and IFPE 2017 will feature, flexible education ticket options to fit attendee needs and schedules. Attendees will also have access to the new 6,970m2 Tech Experience area, which will showcase ideas and technologies to transform the future of construction, boosting safety, productivity and profitability. The organisers are also offe
  • ADT market developments
    May 25, 2016
    The market for ADTs has developed considerably in the last 20 years while the number of manufacturers active in this segment has also grown Volvo CE was a pioneer of the ADT; the first firm to mass manufacture an articulating, tipper truck with all-wheel-drive in the 1960s, although it is not correct to say that the firm actually invented the ADT as some may claim. Performance has increased considerably in the ADT sector in recent years, with many trucks now featuring low maintenance, oil-immersed d
  • An array of crushing and screening innovations was presented at the recent INTERMAT 2012 exhibition
    July 19, 2012
    The crushing and screening phase is a crucial component in aggregate production and new development will help optimise performance - Mike Woof reports Crushing and screening is a key part of the quarrying cycle and has a huge impact on overall operating performance. Optimising operations will cut running costs, reduce materials wastage and also provide a more consistent product quality, boosting cost-effectiveness dramatically. An array of innovations were revealed to the market at the recent INTERMAT 2012