Milling versatility from Roadtec

Roadtec is now developing its RX600eLR milling machine as a more versatile unit for the 2m class. The machine has been unveiled in prototype form, with full testing set to commence shortly. A key development for the RX600eLR is that the drum is driven by two hydrostatic motors, with one mounted on each side.
April 12, 2016 Read time: 2 mins
Roadtec’s RX600eLR offers versatility for milling
1252 Roadtec is now developing its RX600eLR milling machine as a more versatile unit for the 2m class. The machine has been unveiled in prototype form, with full testing set to commence shortly. A key development for the RX600eLR is that the drum is driven by two hydrostatic motors, with one mounted on each side.

International marketing director Eric Baker said, “It can cut flush on both sides. It’s important for every market because you can’t go against traffic.” He explained that in most markets, road authorities do not allow construction machines to operate against the flow of traffic and added, “In right hand drive countries they’re fighting with that belt drive sticking out.”

The hydrostatic drives do provide benefits for the user. Baker said, “There are some advantages as you can adjust the speed infinitely and if you hit any obstructions, the hydrostatics can respond very quickly.”

He went on, “We built left hand flush cut machines before.” However this new design is more versatile and offers a much wider range of capabilities. With a standard machine it is possible to change the speed of the cutter drum by adjusting engine rpm but that approach has its limitations as it means there is a restriction on the power available. It is possible to change pulleys to adjust cutter drum speed, but this takes time and only allows a few speed options. Being able to adjust the speed infinitely allows the user to match the unit to the operating conditions. Power comes from a 196 Cummins diesel rated at 503kW and which meets Tier 4 Final/Stage IV emissions requirements.

This concept is more versatile and allows flush cutting alongside kerbs and New Jersey type barriers, no matter which side of the road vehicles drive on. And Baker continued, “We didn’t see the need for a slide on the cutter drum as we built the machine narrow enough and we can just crabsteer it around manholes. The drum housing is out past the outside of the machine and the tracks are set in a bit.”

The machine weighs around 30tonnes and can also be equipped with standard milling features including grade control and dust extraction.

For more information on companies in this article

Related Content

  • Cummins moves closer to Stage IV emissions at INTERMAT
    February 3, 2012
    Cummins is using INTERMAT to display a full line-up of engines in the 56-506kW sector with next generation exhaust after treatment systems that meet EU Stage IV and EPA Tier 4 Final emissions regulations.
    Read More
  • Chinese manufacturers competing in quarrying segment
    March 5, 2015
    Chinese firms are now gearing up to tackle the quarrying market - Mike Woof writes. One of the key developments of note for the bauma China exhibition in late 2014 was the number of Chinese manufacturers now looking to compete in the quarrying sector. Also of note was how Western manufacturers are also taking the emergent markets seriously, developing machines to counter this increased competition from China. In many cases Western manufacturers have partnered with Chinese firms, bought out Chinese companies
    Read More
  • Choosing the right dowel drilling equipment
    March 16, 2012
    Several aspects factor into choosing the proper concrete dowel drill - Randy Stevens. The concrete paving industry has seen significant changes to dowel drilling equipment over the years. Many years ago only hand-held models existed and when the first hydraulic drills were launched over 30 years ago, these increased production and reduced labour needs. Since that time pneumatic drills, have come to market and these are driven by air compressors, which are common on many worksites while the units also have l
    Read More
  • Dressta works on next two generation crawler dozers
    December 20, 2013
    Dressta, the Poland-based LiuGong subsidiary, is developing its next generation of dozer crawlers, the first of which will be potentially available to customers sometime in 2016. Speaking at a recent Dressta press event at the firm’s HQ and factory in Stalowa Wola, southern Poland, David Beatenbough, LiuGong’s vice president, said: “We’ve got major work going on our next generation crawler dozer. It’s a global project. We have a team of Chinese [LiuGong] engineers who are paired off with a Polish [Dressta]
    Read More

Highlighted Content