Milling versatility from Roadtec

Roadtec is now developing its RX600eLR milling machine as a more versatile unit for the 2m class. The machine has been unveiled in prototype form, with full testing set to commence shortly. A key development for the RX600eLR is that the drum is driven by two hydrostatic motors, with one mounted on each side.
April 12, 2016 Read time: 2 mins
Roadtec’s RX600eLR offers versatility for milling
1252 Roadtec is now developing its RX600eLR milling machine as a more versatile unit for the 2m class. The machine has been unveiled in prototype form, with full testing set to commence shortly. A key development for the RX600eLR is that the drum is driven by two hydrostatic motors, with one mounted on each side.

International marketing director Eric Baker said, “It can cut flush on both sides. It’s important for every market because you can’t go against traffic.” He explained that in most markets, road authorities do not allow construction machines to operate against the flow of traffic and added, “In right hand drive countries they’re fighting with that belt drive sticking out.”

The hydrostatic drives do provide benefits for the user. Baker said, “There are some advantages as you can adjust the speed infinitely and if you hit any obstructions, the hydrostatics can respond very quickly.”

He went on, “We built left hand flush cut machines before.” However this new design is more versatile and offers a much wider range of capabilities. With a standard machine it is possible to change the speed of the cutter drum by adjusting engine rpm but that approach has its limitations as it means there is a restriction on the power available. It is possible to change pulleys to adjust cutter drum speed, but this takes time and only allows a few speed options. Being able to adjust the speed infinitely allows the user to match the unit to the operating conditions. Power comes from a 196 Cummins diesel rated at 503kW and which meets Tier 4 Final/Stage IV emissions requirements.

This concept is more versatile and allows flush cutting alongside kerbs and New Jersey type barriers, no matter which side of the road vehicles drive on. And Baker continued, “We didn’t see the need for a slide on the cutter drum as we built the machine narrow enough and we can just crabsteer it around manholes. The drum housing is out past the outside of the machine and the tracks are set in a bit.”

The machine weighs around 30tonnes and can also be equipped with standard milling features including grade control and dust extraction.

For more information on companies in this article

Related Content

  • Ammann’s steerable pedestrian roller equals versatility
    April 26, 2024

    Ammann is offering an innovation in the shape of its ARW 65-S walk-behind Roller, which features articulated steering. This make allows the user to guide the machine more accurately forward, backward, and laterally.

    The new S version has a pivoting mechanism , unlike the prior version which only enables forward and reverse movements. With the S version, the machine can also be moved to the right and left using the control handle.

    Read More
  • Notable developments have been made in milling machines
    February 21, 2013
    The milling machine market is increasingly competitive - Mike Woof reports. Having been a pioneer of the road milling machine market, it is no surprise that the Wirtgen group holds a dominant position in this sector. The company has arguably the broadest range of machines available with the widest array of options and features, to suit specific applications as well as regional requirements. The company has faced increasing levels of competition however, with firms such as BOMAG, Caterpillar, Dynapac, Roadte
    Read More
  • Innovations in asphalt surfacing will deliver improvements
    June 20, 2017
    The first few months of 2017 have seen a flurry of new model introductions in the asphalt paving sector for both European and North American paving types - Mike Woof writes. Developments are being seen in both European and North American asphalt paving machines. The latest equipment will help boost productivity and quality for asphalt paving work, while many of the new machines also offer increased versatility. Innovations in telematics meanwhile are helping to ensure that new generation asphalt pavers also
    Read More
  • Recycling the Italian way: FAE, Simex, CAMS
    August 31, 2022

    FAE says that its dedicated soil stabiliser is now well-accepted and can work to depths down to 500mm. Because the unit is towed by large tractors, it is suitable for smaller and more compact sites where self-powered stabilisers would be difficult to use.

    As the units are towed by large tractors, the company also distributes the machines through a number of tractor dealers, according to Giorgio Carera, chief executive of FAE in North America. “That’s the kind of distribution we use.”

    Read More

Highlighted Content