Skip to main content

Hatz’s American launch of 4H50TIC engine at Conexpo 2014

Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class. The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by
January 6, 2017 Read time: 3 mins
Hatz’s new 4H50TIC water-cooled multi-cylinder turbo engine
7125 Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class.

The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by the firm to have the lowest power to weight ratio in the power class up to 56kW.

Due to the new combustion process iHACS (intelligent Hatz Advanced Combustion Strategy) and optimised combustion chamber geometry, combined with the sophisticated technology of the 3405 Bosch common rail system, which operates with injection pressures up to 1800bars, the 4H50TIC’s particulate emissions are considerably reduced. Therefore Hatz says it is possible to achieve the exhaust emissions standards EU 97/68 stage IIIB and EPA Tier 4 final without the use of a diesel particulate filter.

Apart from the technical data, the engine also scores high marks with low cost of ownership; firstly because of a low fuel consumption of 205g/kWh (best point), and secondly because of a long service interval of 500 hours.

The 1D81C Aircon APU, also being exhibited by Hatz at Conexpo, combines an air conditioning compressor with a generator and is driven by an air-cooled diesel engine. Application areas for the Aircon APU are primarily construction machines, which are driven by a large engine.

The Aircon APU supplies cooling air to the machine cab via the compressor and simultaneously charges the batteries of the machine. Depending on the requirements, the system can be operated with various Hatz engines. The Aircon APU consumes approximately 2.1litres/hour. The system is said by Hatz to save up to 16,000litres of fuel a year, so, the firm claims, it will pay for itself after 12-15 months.Furthermore, the Aircon APU gives security against upcoming non-idling laws in the US that prevent the use of the main engine for air conditioning during idle time. Because of their compact size, the 1D81C Aircon APU can be easily integrated into existing applications.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 81095 0 oLinkExternal www.Hatz-Diesel.com Hatz Web false /EasySiteWeb/GatewayLink.aspx?alId=81095 false false%>

For more information on companies in this article

Related Content

  • Innovative hybrid mixer developed by CIFA
    February 21, 2013
    CIFA is introducing an innovative hybrid truck mixer in the shape of its new Energya 9 model. This features a conventional 9m3 capacity mixer drum however the rotational drive system is electric and the machine is also equipped with a lithium ion type battery pack that is charged up while the truck is being driven, assisted by regenerative braking. When the mixer stops on-site, the drive to the drum is supplied either by the battery pack or can be plugged in to a mains power supply. This allows the truck dr
  • Innovation awards programme announced for Conexpo 2014
    January 28, 2014
    The Conexpo 2014 exhibition is launching its Innovation Awards programme to recognise the best product innovation and engineering. The winners are to be announced at the show and industry participants are being invited to vote online. The awards are intended to spotlight the achievements of show exhibitors in the areas of earthmoving, lifting, road building, compaction and concrete. Industry professionals can vote online to determine the winners. Voters who register have the chance to win a new Microsoft Su
  • Yanmar shows new engines at INTERMAT
    January 6, 2017
    Yanmar Europe is using INTERMAT to reveal a new series of water-cooled industrial diesel engines that meet the new EPA Tier 4 and EU Stage IIIB off-highway emission regulations up to 56kW. Based on its TNV series, the new range includes 10 models in three- and four-cylinder formats with indirect and direct injection, and ranging from 10kW to 56kW. Four of these new engines, the 3TNV80F, 3TNV88C, 3TNV86CT and 4TNV98C, are at INTERMAT 2012. Engines over 19kW use an ECU-controlled common rail fuel injection, c
  • Yanmar shows new engines at INTERMAT
    February 6, 2012
    Yanmar Europe is using INTERMAT to reveal a new series of water-cooled industrial diesel engines that meet the new EPA Tier 4 and EU Stage IIIB off-highway emission regulations up to 56kW. Based on its TNV series, the new range includes 10 models in three- and four-cylinder formats with indirect and direct injection, and ranging from 10kW to 56kW. Four of these new engines, the 3TNV80F, 3TNV88C, 3TNV86CT and 4TNV98C, are at INTERMAT 2012. Engines over 19kW use an ECU-controlled common rail fuel injection, c