Skip to main content

Hatz’s American launch of 4H50TIC engine at Conexpo 2014

Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class. The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by
January 6, 2017 Read time: 3 mins
Hatz’s new 4H50TIC water-cooled multi-cylinder turbo engine
7125 Hatz is celebrating the American introduction of its water-cooled multi-cylinder 4H50TIC turbo engine at Conexpo 2014. The engine is said by the German diesel engine manufacturer to set several new standards in its class.

The two-litre model became available to buy in January 2014 and has a maximum power of 55kW and a maximum torque of 240Nm. Including starter and alternator, the 4H50TIC weighs just 173kg, said by Hatz to be a saving 90kg compared to its next competitor. As a result, the engine is said by the firm to have the lowest power to weight ratio in the power class up to 56kW.

Due to the new combustion process iHACS (intelligent Hatz Advanced Combustion Strategy) and optimised combustion chamber geometry, combined with the sophisticated technology of the 3405 Bosch common rail system, which operates with injection pressures up to 1800bars, the 4H50TIC’s particulate emissions are considerably reduced. Therefore Hatz says it is possible to achieve the exhaust emissions standards EU 97/68 stage IIIB and EPA Tier 4 final without the use of a diesel particulate filter.

Apart from the technical data, the engine also scores high marks with low cost of ownership; firstly because of a low fuel consumption of 205g/kWh (best point), and secondly because of a long service interval of 500 hours.

The 1D81C Aircon APU, also being exhibited by Hatz at Conexpo, combines an air conditioning compressor with a generator and is driven by an air-cooled diesel engine. Application areas for the Aircon APU are primarily construction machines, which are driven by a large engine.

The Aircon APU supplies cooling air to the machine cab via the compressor and simultaneously charges the batteries of the machine. Depending on the requirements, the system can be operated with various Hatz engines. The Aircon APU consumes approximately 2.1litres/hour. The system is said by Hatz to save up to 16,000litres of fuel a year, so, the firm claims, it will pay for itself after 12-15 months.Furthermore, the Aircon APU gives security against upcoming non-idling laws in the US that prevent the use of the main engine for air conditioning during idle time. Because of their compact size, the 1D81C Aircon APU can be easily integrated into existing applications.
%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 81095 0 oLinkExternal www.Hatz-Diesel.com Hatz Web false /EasySiteWeb/GatewayLink.aspx?alId=81095 false false%>

For more information on companies in this article

Related Content

  • Stanley’s power point presentation
    January 6, 2017
    Stanley claims its GTR20 B01 power unit is at the cutting edge of construction site hydraulic power for tools. The generator, on sale in America but new to the European market, delivers a hydraulic flow of 40 or 2* 20L/min at pressures up to 2,000psi, with heat rejection capacity exceeding the EHTMAS recommendation of 5hp.
  • Stanley’s power point presentation
    April 13, 2012
    Stanley claims its GTR20 B01 power unit is at the cutting edge of construction site hydraulic power for tools. The generator, on sale in America but new to the European market, delivers a hydraulic flow of 40 or 2* 20L/min at pressures up to 2,000psi, with heat rejection capacity exceeding the EHTMAS recommendation of 5hp.
  • Caterpillar introduces more productive wheeled loaders
    January 6, 2017
    Caterpillar has designed its 980M and 982M wheeled loaders for fast loading purposes. The 982M can load an on/off-highway trucks in two passes and is powered by a Tier 4 Final compliant C13 diesel rated at 292kW, while it shares features with the 980M model which is powered by a C13 diesel rated at 288kW. Compared with the 980M aggregates handler, design changes in the 982M’s frame, linkages, hydraulics, power and powertrain extend its application range to sand and gravel and earth bank excavation and even
  • Caterpillar introduces more productive wheeled loaders
    January 23, 2014
    Caterpillar has designed its 980M and 982M wheeled loaders for fast loading purposes. The 982M can load an on/off-highway trucks in two passes and is powered by a Tier 4 Final compliant C13 diesel rated at 292kW, while it shares features with the 980M model which is powered by a C13 diesel rated at 288kW. Compared with the 980M aggregates handler, design changes in the 982M’s frame, linkages, hydraulics, power and powertrain extend its application range to sand and gravel and earth bank excavation and even