FPT goes high-power with V20 power unit

FPT Industrial revealed an all-new range-topping power unit at CONEXPO-CON/AGG. It is called the V20 as a reference to its 20litre capacity, and the new power unit sits above the previous flagship, the inline six-cylinder Cursor 16. V20 packs a punch from its V8 architecture, with up to 680kW of power available from 1600-1800rpm, and 4100Nm of torque at 1500rpm. FPT said the V20 is currently the most compact engine of its category, which it sees as a viable alternative for much larger V12 units that offer
March 9, 2017 Read time: 2 mins
FPT’s new 20litre engine, the V20

7935 FPT Industrial revealed an all-new range-topping power unit at CONEXPO-CON/AGG. It is called the V20 as a reference to its 20litre capacity, and the new power unit sits above the previous flagship, the inline six-cylinder Cursor 16.

V20 packs a punch from its V8 architecture, with up to 680kW of power available from 1600-1800rpm, and 4100Nm of torque at 1500rpm. FPT said the V20 is currently the most compact engine of its category, which it sees as a viable alternative for much larger V12 units that offer similar performance.

FPT said the new engine is also Tier 4 Final/Stage V compliant, and it achieves emissions regulations without the need of DPF or cooled EGR systems.

A new design of piston bowl and combustion chamber is claimed to deliver a 2% reduction in fuel burn compared to similarly-powered V12 engines, and FPT said the option of 1,000hour oil drain intervals exist as an extension to the 600hour interval offered across other FPT engines.

The FPT V20 has been specifically developed to suit stationary and mobile applications. It features two wastegated turbochargers with a cross-bank exhaust feed to even out pulsing that can affect vee-engine formats. The engine also gains the latest generation common rail fuel injection with system pressures of 2200bar, which comprises fuel rails on each vee, and a third ‘balancing’ rail, to even out any hydraulic pulsing from the eight-cylinder layout.

For more information on companies in this article

Related Content

  • KDI 3404 joins Kohler’s KDI family of engines
    January 29, 2015
    Kohler will be further promoting its new KDI (Kohler Direct Injection) family of diesel engines that has now expanded with the introduction of the new KDI 3404 model. Produced in the Kohler Engines’ diesel production facility at Reggio Emilia, Italy, following Kohler’s acquisition of Lombardini in 2007, the new KDI 3404 engine is available in two models and four power ratings, and complies with Tier 4 Final, Stage IV regulations within the 56-100 kW power range thanks to the compact, high-efficiency SCR (s
    Read More
  • KDI 3404 joins Kohler’s KDI family of engines
    January 6, 2017
    Kohler will be further promoting its new KDI (Kohler Direct Injection) family of diesel engines that has now expanded with the introduction of the new KDI 3404 model. Produced in the Kohler Engines’ diesel production facility at Reggio Emilia, Italy, following Kohler’s acquisition of Lombardini in 2007, the new KDI 3404 engine is available in two models and four power ratings, and complies with Tier 4 Final, Stage IV regulations within the 56-100 kW power range thanks to the compact, high-efficiency SCR (s
    Read More
  • Low-emission construction machine engines launched
    April 20, 2012
    Deutz has unveiled its latest range of 2.9-16litre EU emission standard diesel engines. The TCD 2.9 L4 is available in either naturally aspirated or turbocharged versions, each with the optional extra of an intercooler. It features cooled external exhaust-gas recirculation and common-rail high-pressure fuel injection. Generating up to 55.4KW, the TCD 2.9 L4's maximum torque of 255Nm is up to 15% higher than comparable Tier 3 engines.
    Read More
  • Innovative fuel injection reduces emissions
    February 24, 2012
    Stricter emissions legislation mean that new engine technology and integrated drivetrain systems are being developed. With the Tier 3/Stage IIIA emissions legislation now in place in North America and Europe, the major engine manufacturers already have an array of solutions on the market. The coming Tier 4 interim/Stage IIIB legislation will be tougher still and most firms are well in hand with their plans to use both in-cylinder and exhaust after-treatment technology. While engines themselves are staying b
    Read More

Highlighted Content