Skip to main content

Yanmar’s new mini excavator is light and slim but still packs a punch

Yanmar’s SV26 mini crawler excavator was launched at bauma 2013. Slim enough to fit in one lane of a road and weighing in at 2590kg, the SV26 can be transported on a small trailer or light vehicle. “Although it is a compact machine, it is very powerful,” said Yanmar spokesperson Anne Chatillon. The SV26 is powered by a three-cylinder Yanmar diesel engine with direct injection and a cylinder capacity of 1330cm3, which reduces fuel consumption and emissions while maintaining high power (17.4kW at 2,400rpm). I
April 19, 2013 Read time: 2 mins
Small but powerful, Yanmar’s new SV26
7139 Yanmar’s SV26 mini crawler excavator was launched at 688 Bauma 2013. Slim enough to fit in one lane of a road and weighing in at 2590kg, the SV26 can be transported on a small trailer or light vehicle.

“Although it is a compact machine, it is very powerful,” said Yanmar spokesperson Anne Chatillon.

The SV26 is powered by a three-cylinder Yanmar diesel engine with direct injection and a cylinder capacity of 1330cm3, which reduces fuel consumption and emissions while maintaining high power (17.4kW at 2,400rpm). It meets the highest standards in terms of exhaust.

Fuel consumption, which is normally 4 litres/hour, can be cut by installing an optional system that automatically reduces engine speed to idle when the machine has not been used for more than four seconds, and then accelerates again when necessary.

The cab has been designed to provide as much space as possible for the operator, with the controls on the right-hand side. It also has and LED monitor.

Following on from the development of the SV26, Yanmar is also displaying three prototype machines in the 1.5 to 2.5tonne range – the SV16, A318 and SV22 will replace their current counterparts.

“We will be getting opinions and feedback from visitors to the stand to find out what they think of them and what they want,” said Chatillon. “After bauma we will re-think everything so as to get the best machine.”

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 81325 0 oLinkExternal www.Yanmar.eu www.Yanmar.eu false /EasySiteWeb/GatewayLink.aspx?alId=81325 false false%>

For more information on companies in this article

Related Content

  • Sandvik is now using Volvo Penta engines in its underground trucks and loaders
    January 6, 2017
    Sandvik Mining is now using Volvo Penta engines in its underground trucks and loaders. The advanced engines meet Tier 4 Interim/Stage IIIB emission standards and are claimed to reduce fuel and ventilation costs in comparison with other units. The Volvo Penta engineers designed a selective catalytic reduction (SCR) unit in the exhaust system that converts NOx gas into nitrogen and water. The Volvo Penta exhaust-treatment solution also reduces DPM levels without the need for a diesel particulate filter (DPF).
  • Sandvik is now using Volvo Penta engines in its underground trucks and loaders
    January 30, 2013
    Sandvik Mining is now using Volvo Penta engines in its underground trucks and loaders. The advanced engines meet Tier 4 Interim/Stage IIIB emission standards and are claimed to reduce fuel and ventilation costs in comparison with other units. The Volvo Penta engineers designed a selective catalytic reduction (SCR) unit in the exhaust system that converts NOx gas into nitrogen and water. The Volvo Penta exhaust-treatment solution also reduces DPM levels without the need for a diesel particulate filter (DPF).
  • New engines at heart of JCB’s upgraded rough terrain forklifts
    January 24, 2014
    JCB is now fitting its new Tier 4 JCB Ecomax diesel engine to its latest rough terrain forklift range. The engine delivers the same 55kW output as the previous Dieselmax motor, but meets the Tier 4 emissions regulations without the need for a diesel particulate filter or an SCR exhaust after-treatment system. This reduces running costs for customers and the Ecomax engine is being fitted to all four models in JCB’s RTFL range: the 926, 930, 940 and 950.
  • Power meets control with Case’s new dozers
    January 6, 2017
    Case says its three new M Series dozers being introduced at bauma – the 1150M, 1650M and 2050M – offer a 10.5% fuel saving, and 19% increase in productivity, compared to the previous generation of machines, due to their claimed best-in-class engine reaction. With operating weights from 13-20tonnes and like other M Series models, the three new dozers are powered by fuel-efficient, Tier 4 Interim FPT engines, using a proven Selective Catalytic Reduction (SCR) technology. The 1150M and 2050M with their new SCR