Skip to main content

Yanmar’s new mini excavator is light and slim but still packs a punch

Yanmar’s SV26 mini crawler excavator was launched at bauma 2013. Slim enough to fit in one lane of a road and weighing in at 2590kg, the SV26 can be transported on a small trailer or light vehicle. “Although it is a compact machine, it is very powerful,” said Yanmar spokesperson Anne Chatillon. The SV26 is powered by a three-cylinder Yanmar diesel engine with direct injection and a cylinder capacity of 1330cm3, which reduces fuel consumption and emissions while maintaining high power (17.4kW at 2,400rpm). I
April 19, 2013 Read time: 2 mins
Small but powerful, Yanmar’s new SV26
7139 Yanmar’s SV26 mini crawler excavator was launched at 688 Bauma 2013. Slim enough to fit in one lane of a road and weighing in at 2590kg, the SV26 can be transported on a small trailer or light vehicle.

“Although it is a compact machine, it is very powerful,” said Yanmar spokesperson Anne Chatillon.

The SV26 is powered by a three-cylinder Yanmar diesel engine with direct injection and a cylinder capacity of 1330cm3, which reduces fuel consumption and emissions while maintaining high power (17.4kW at 2,400rpm). It meets the highest standards in terms of exhaust.

Fuel consumption, which is normally 4 litres/hour, can be cut by installing an optional system that automatically reduces engine speed to idle when the machine has not been used for more than four seconds, and then accelerates again when necessary.

The cab has been designed to provide as much space as possible for the operator, with the controls on the right-hand side. It also has and LED monitor.

Following on from the development of the SV26, Yanmar is also displaying three prototype machines in the 1.5 to 2.5tonne range – the SV16, A318 and SV22 will replace their current counterparts.

“We will be getting opinions and feedback from visitors to the stand to find out what they think of them and what they want,” said Chatillon. “After bauma we will re-think everything so as to get the best machine.”

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 81325 0 oLinkExternal www.Yanmar.eu www.Yanmar.eu false /EasySiteWeb/GatewayLink.aspx?alId=81325 false false%>

For more information on companies in this article

Related Content

  • Intermat launch for Liebherr wheeled excavators
    January 6, 2017
    2012 sees the start of a new wheeled excavator programme from Liebherr, and the A916 represents the first fruit from the project. Replacing the A316 Litronic, the new A916 has been developed to meet Stage IIIB emissions requirements and has an operating weight from 17-18.1 tonnes depending on specification. Power comes from a four-cylinder 110kW engine with common rail fuel injection, EGR and DOC – a DPF is available as an optional extra for those working inside buildings.
  • Intermat launch for Liebherr wheeled excavators
    March 19, 2012
    2012 sees the start of a new wheeled excavator programme from Liebherr, and the A916 represents the first fruit from the project. Replacing the A316 Litronic, the new A916 has been developed to meet Stage IIIB emissions requirements and has an operating weight from 17-18.1 tonnes depending on specification. Power comes from a four-cylinder 110kW engine with common rail fuel injection, EGR and DOC – a DPF is available as an optional extra for those working inside buildings.
  • Perkins will demonstrate how its engine will meet EU Stage IV/US Tier 4 Final emissions regulations
    January 6, 2017
    Perkins will showcase a complete line-up of Stage IV/Tier 4 Final engine solutions at Bauma, ahead of the new legislation next year. The four cylinder 854F-E34TA will demonstrate much of the technology on offer, as it uses Selective Catalytic Reduction (SCR) with an exhaust additive, plus a Diesel Oxidation Catalyst (DOC). Both Perkins’ 3.4 and 4.4-litre engine lines make do without a Diesel Particulate Filter (DPF), though the larger 7 litre will use a DPF as well.
  • Perkins will demonstrate how its engine will meet EU Stage IV/US Tier 4 Final emissions regulations
    February 7, 2013
    Perkins will showcase a complete line-up of Stage IV/Tier 4 Final engine solutions at Bauma, ahead of the new legislation next year. The four cylinder 854F-E34TA will demonstrate much of the technology on offer, as it uses Selective Catalytic Reduction (SCR) with an exhaust additive, plus a Diesel Oxidation Catalyst (DOC). Both Perkins’ 3.4 and 4.4-litre engine lines make do without a Diesel Particulate Filter (DPF), though the larger 7 litre will use a DPF as well.