Twin SCR system for Deutz V6 and V8 engines

Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards. Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.
March 6, 2014 Read time: 2 mins
Deutz TCD12 V6 diesel engine
201 Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards.

Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.

Deutz’s SCR package uses a combined DOC/SCR catalyst as the first phase of exhaust treatment, followed by a ‘clean-up’ catalyst. While slightly bulkier than a single SCR system, the dual SCR package uses one tank and two dosing systems but does not use twice as much fluid, said the company.

These latest TCD12 and TCD16 engines are said to offer up to 8% more performance with average fuel consumption reduced by around 5% compared to the previous Tier 4 interim versions. However, expect DEF consumption to increase by 2%, said Deutz.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.DeutzAmericas.com Visit Deutz Americas Website false http://www.deutzamericas.com/home.cfm false false%>

For more information on companies in this article

Related Content

  • Bell is introducing its new B25E and B30E ADTs
    January 6, 2017
    Bell Equipment is now launching the new B25E and B30E ADTs to its range, seen first in prototype form at the Intermat show in Paris in 2012. Marc Schürmann managing director of Bell Equipment Europe said, “There are several improvements over the D series. The A frame design from the larger trucks is now being used in the smaller trucks. There is more suspension travel and this gives more comfort and allows higher travel speeds.” He added that the increased travel speed is of particular benefit when the truc
    Read More
  • Bell is introducing its new B25E and B30E ADTs
    February 7, 2013
    Bell Equipment is now launching the new B25E and B30E ADTs to its range, seen first in prototype form at the Intermat show in Paris in 2012. Marc Schürmann managing director of Bell Equipment Europe said, “There are several improvements over the D series. The A frame design from the larger trucks is now being used in the smaller trucks. There is more suspension travel and this gives more comfort and allows higher travel speeds.” He added that the increased travel speed is of particular benefit when the truc
    Read More
  • JCB introduces compact telehandler that meets emission regulations
    January 24, 2014
    JCB is expanding its telehandler line-up with the addition of the compact 525-60 at Conexpo. According to the firm, the 525-60 offers full-size telehandler performance in a compact chassis. Maximum lift height is 6m and its load capacity is 2.5 tonnes, while the 525-60 is just 1.8m wide and 1.91m tall. This allows it to be operated in sites with limited space. The 525-60 Hi-Viz replaces the rear-engined 524-50, 527-55 and the 520-50 models, and features a side-mounted engine design. This permits a low boom
    Read More
  • Improved soil compactors developed by BOMAG
    January 6, 2017
    Boppard based BOMAG is unveiling its new 5-8tonne class soil compactors, which are said to offer increased performance and lower running costs.
    Read More

Highlighted Content