Twin SCR system for Deutz V6 and V8 engines

Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards. Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.
March 6, 2014 Read time: 2 mins
Deutz TCD12 V6 diesel engine
201 Deutz has adopted a dual SCR after-treatment system on its high output TCD Vee engines to meet Tier 4 final emissions standards.

Using a dual SCR system, the water-cooled 90-degree V6 12litre and V8 16litre engines, with power outputs from 390-520kW, were found not to require cooled EGR, DOC or DPF technologies. Compared to a similar engine using cooled EGR, Deutz said its TCD12 and TCD16 can operate with a cooling package that is around 20-25% smaller, improving installation packaging for OEMs.

Deutz’s SCR package uses a combined DOC/SCR catalyst as the first phase of exhaust treatment, followed by a ‘clean-up’ catalyst. While slightly bulkier than a single SCR system, the dual SCR package uses one tank and two dosing systems but does not use twice as much fluid, said the company.

These latest TCD12 and TCD16 engines are said to offer up to 8% more performance with average fuel consumption reduced by around 5% compared to the previous Tier 4 interim versions. However, expect DEF consumption to increase by 2%, said Deutz.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.DeutzAmericas.com Visit Deutz Americas Website false http://www.deutzamericas.com/home.cfm false false%>

For more information on companies in this article

Related Content

  • Hydrema updates 912HM dump truck
    January 6, 2017
    Hydrema has revised its 912 range of articulated dump trucks, with a move from Perkins power to a Cummins Tier 4 Interim/Stage IIIB motor. The QSB4.5L engine delivers 105kW of power, up 8% on the previous model, but more importantly has 20% more torque, at 620Nm. Despite the increased output, Hydrema claims similar fuel consumption to the previous ADT line-up. The engine sits beneath a redesigned canopy that lifts clear of the chassis to provide easy access to the engine and driveline. The trucks also feat
    Read More
  • Liebherr adds TA240 to ADT line-up
    January 6, 2017
    Liebherr has added a second model to its articulated hauler range with the TA240. The 40 tonne capacity truck has a 27m3 body and a 6x6 driveline. Power comes from a 16.2 litre Stage IIIB Liebherr V8 diesel engine delivering 350kW (476hp). This enables the truck to reach maximum speeds of up to 57km/h. A high performance retarder helps to bring the truck to a halt and can be preselected, with both the engine brake and the retarder working as soon as the driver lifts their foot from the throttle pedal. Wet,
    Read More
  • Liebherr adds TA240 to ADT line-up
    February 8, 2013
    Liebherr has added a second model to its articulated hauler range with the TA240. The 40 tonne capacity truck has a 27m3 body and a 6x6 driveline. Power comes from a 16.2 litre Stage IIIB Liebherr V8 diesel engine delivering 350kW (476hp). This enables the truck to reach maximum speeds of up to 57km/h. A high performance retarder helps to bring the truck to a halt and can be preselected, with both the engine brake and the retarder working as soon as the driver lifts their foot from the throttle pedal. Wet,
    Read More
  • Cummins ditches cooled EGR on its latest QSM12
    January 6, 2017
    Cummins has taken a major leap forward with engine design as it ditches cooled exhaust gas recirculation for its newest heavy-duty six-cylinder engine platform launched at bauma – the 12-litre QSM12. As its Tier 4 Final/Stage 4 engine solution in the 250-383kW sector, the QSM12 benefits from higher efficiency air handling and an advanced in-cylinder combustion process, allowing a return to using a straightforward wastegated turbocharger.
    Read More

Highlighted Content