Simex’s versatile tool helps in tunnel excavation duties

Italian firm Simex has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).
March 13, 2013 Read time: 2 mins
Italian firm 1141 SIMEX has developed a versatile tool for use in tunnel excavation applications. This proven piece of equipment has been used to help construct a key tunnel link in Italy, close to the border with Switzerland. Work on the Varzo Tunnel has been carried out by Italian contractor Ceprini Costruzioni (CC).

The final phase of this three-phase project required the installation of two-hinged steel ribs every 1.75m, anchored to ties with a C-shaped fastening element (totalling 44 elements). Another task was the laying of a 10x10cm, 6mm diameter wire mesh covering up to 18cm of fibre-reinforced shotcrete. One of the major challenges of the third phase was to cut around 20cm deep and 40cm wide into the crown of the tunnel in order to create the inserts for the steel ribs.  A solution to the problem was offered by Simex, which designed a special rotary cutter derived from the model TF 800.

Attached to a 2300 Komatsu PC138 US short-radius excavator, and featuring a modified boom and special bracket (both supplied by Grifo workshops in Perugia), the rotary cutter made it possible to make the inserts for the steel ribs.  The use of a hydraulic breaker for the application was immediately discarded by CC due to the length of time associated with its use and the lack of optimum precision, with the possible introduction of dangerous vibrations into the crown near the deteriorated area. CC decided to use a pair of Komatsu PC 138 US excavators and two Simex TF 800/V rotary cutters. The cutters were equipped with drums measuring a width of 400mm and diameter of 1100mm, and fitted with 144 Betek VC 33 bits with a 22mm bit holder.  Both cutters were said to have proven productive and reliable and were operated without interruption for 164 hours each.

Stand: B3.222

www.simex.it

View more videos
View more stories

For more information on companies in this article

Simex
Komatsu

Related Content

  • Komatsu CARE launched at INTERMAT
    January 6, 2017
    Identifying the difficulties end-users can face with diesel particulate filters on Stage IIIb emissions-compliant engines, Komatsu Europe International announced it will provide customers with a complimentary maintenance programme and Komatsu diesel particulate filter (KDPF) exchange. Called Komatsu CARE, the programme includes complimentary factory-scheduled maintenance on EU Stage IIIB Komatsu construction equipment for the first three years or 2000 hours, whichever occurs first. Available at all offici
    Read More
  • Komatsu CARE launched at INTERMAT
    April 18, 2012
    Identifying the difficulties end-users can face with diesel particulate filters on Stage IIIb emissions-compliant engines, Komatsu Europe International announced it will provide customers with a complimentary maintenance programme and Komatsu diesel particulate filter (KDPF) exchange. Called Komatsu CARE, the programme includes complimentary factory-scheduled maintenance on EU Stage IIIB Komatsu construction equipment for the first three years or 2000 hours, whichever occurs first. Available at all offici
    Read More
  • Evonik’s Dynavis technology helps fine-tune machinery
    February 22, 2016
    Dynavis, a major additive product from Evonik. helps fine-tune engines, pumps, drive systems and hydraulics. “A simple change of hydraulic fluid can help save fuel, even—and particularly—in used construction machines,” says Rolf Fianke, technology aftermarket support manager at Evonik. In Italy, Nuova Ghizzoni, an Italian pipeline contractor, switched its entire fleet of hydraulic excavators to a fluid formulated with Dynavis technology supplied by a Dynavis licensee. The switch was a move away from c
    Read More
  • Evonik’s Dynavis technology helps fine-tune machinery
    January 6, 2017
    Dynavis, a major additive product from Evonik. helps fine-tune engines, pumps, drive systems and hydraulics. “A simple change of hydraulic fluid can help save fuel, even—and particularly—in used construction machines,” says Rolf Fianke, technology aftermarket support manager at Evonik. In Italy, Nuova Ghizzoni, an Italian pipeline contractor, switched its entire fleet of hydraulic excavators to a fluid formulated with Dynavis technology supplied by a Dynavis licensee. The switch was a move away from c
    Read More

Highlighted Content