Skip to main content

Mantovanibenne shows redesigned shear

Mantovanibenne has increased the cylinder size on its latest Eagle II range of shears and redesigned the tip with a replaceable blade that pierces the material before searing back towards the throat while the one jaw is scalloped to release cut material. On display at bauma was the SH550 Eagle II, which fits carriers in the 50-65tonne range (39-45tonne if boom-mounted) and has a maximum opening of 760mm. The range goes up to the SH2000R, which suits machines upwards of 100tonnes with a 1.2m maximum opening
January 6, 2017 Read time: 2 mins
Mantovanibenne’s new shears pierce the material before cutting.
1140 Mantovanibenne has increased the cylinder size on its latest Eagle II range of shears and redesigned the tip with a replaceable blade that pierces the material before searing back towards the throat while the one jaw is scalloped to release cut material  

On display at 688 Bauma was the SH550 Eagle II, which fits carriers in the 50-65tonne range (39-45tonne if boom-mounted) and has a maximum opening of 760mm.  

The range goes up to the SH2000R, which suits machines upwards of 100tonnes with a 1.2m maximum opening, down to the SH25R for four to six tonne excavators with a maximum opening of 195mm.

Also on show is the company’s CRH440 cracker, with a patented triple booster pump design to increase the available crushing force. According to the company, the design is very powerful for its size and the double pivot design increases the jaw opening relative to the size of the unit.

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 44293 0 oLinkExternal www.Mantovanibenne.com www.Mantovanibenne.com false /EasySiteWeb/GatewayLink.aspx?alId=44293 false false%>

For more information on companies in this article

Related Content

  • Bell pushes boundaries of ADT development with new models
    January 14, 2014
    Bell Equipment is now introducing its novel E-series generation of haulers at Conexpo. The Bell E-series includes the smaller B25E and B30E models, which retain the firm’s high power to weight-ratios, as well as featuring advanced engine and drivetrain characteristics. These trucks are also said to set new standards in safety, driver comfort and truck management.
  • Atlas has revamped its hydraulic breaker range
    January 6, 2017
    Atlas is now offering its own range of hydraulic breakers. These units are offered with operating weights from 135kg--5.7tonnes and can be used on machines right across the firm’s own excavator range. The firm says that its breakers are designed to absorb impact, reducing wear and tear on the carrier and absorbing vibration, lengthening hose life. A system regulates the number of blows to keep working frequency constant under all conditions. A lubrication system extends component life while all the units ca
  • Atlas has revamped its hydraulic breaker range
    February 5, 2013
    Atlas is now offering its own range of hydraulic breakers. These units are offered with operating weights from 135kg--5.7tonnes and can be used on machines right across the firm’s own excavator range. The firm says that its breakers are designed to absorb impact, reducing wear and tear on the carrier and absorbing vibration, lengthening hose life. A system regulates the number of blows to keep working frequency constant under all conditions. A lubrication system extends component life while all the units ca
  • On-highway regulations point to Scania off-highway emissions solution
    January 6, 2017
    Scania will be showing both Euro 6 engines for its on-highway truck range and Stage IIB/Tier 4 Final powerplants for off-highway use. The company will use both exhaust gas recirculation (EGR) and selective catalytic reduction (SCR) to meet the coming regulations, as with its current Stage IIIB solution. This means the fitting of a diesel oxidation catalyst (DOC) but no requirement for a DPF. Scania engines are currently in use in Terex and Doosan articulated haulers, along with a number of Terex crushing ma