JLG produces ultra-compact access platform

JLG has launched the 10MSP, a stock picker with a platform height of 3.05m and an overall width of just 0.83m. The platform capacity is 159kg, with a material tray capacity of 113kg. The 10MSP uses a joystick to steer and drive, with turn-on-the-spot capability for ultimate manoeuvrability,
April 20, 2012 Read time: 1 min
The 10MSP is one of a family of stock pickers
RSS2199 JLG has launched the 10MSP, a stock picker with a platform height of 3.05m and an overall width of just 0.83m.

The platform capacity is 159kg, with a material tray capacity of 113kg. The 10MSP uses a joystick to steer and drive, with turn-on-the-spot capability for ultimate manoeuvrability.

www.jlgeurope.com

View more videos

For more information on companies in this article

JLG

Related Content

  • Boom time at JLG
    April 12, 2012
    Unveiled as a prototype at SAIE, Italy in October 2010, the compact 340AJ boom lift can cope with grades and break-over angles up to 45° allowing it to drive on slopes and up ramps. Built to a working height of 12.35metres and with a horizontal outreach of 6.07metres, the 340AJ is said by JLG to meet demands for a broad range of applications. The jib extends to 1.2metres with near vertical operation. When ground conditions get tough, proper off-road performance is ensured by the standard oscillating axle an
    Read More
  • Loads better weighing with Loadrite
    January 6, 2017
    Loadrite global marketing communications manager Simon Rush says the New Zealand firm’s on-board weighing systems for construction machines have been designed with operators in mind. “They take raw data and turn it into something really easy to understand,” said Rush. “Operators are only using one button 90% of the time, which means they are more likely to take up using them.” The Loadrite X-Weigh 2350, being exhibited at INTERMAT, can track overall tonnes and tonnes per hour throughout a construction proje
    Read More
  • Loads better weighing with Loadrite
    April 18, 2012
    Loadrite global marketing communications manager Simon Rush says the New Zealand firm’s on-board weighing systems for construction machines have been designed with operators in mind. “They take raw data and turn it into something really easy to understand,” said Rush. “Operators are only using one button 90% of the time, which means they are more likely to take up using them.” The Loadrite X-Weigh 2350, being exhibited at INTERMAT, can track overall tonnes and tonnes per hour throughout a construction proje
    Read More
  • INTERMAT launch for Atlas Copco Edge Drill Monitor
    January 6, 2017
    Atlas Copco used INTERMAT to launch the Edge Drill Monitor – an innovative system of measuring shock waves from down-the-hole drilling. Information about the hammer and the bit is displayed graphically in real time, allowing the operator to extract maximum performance and efficiency as geology changes during the drilling process, to maintain the correct degree of flushing and avoid tool breakage.
    Read More

Highlighted Content