Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
January 6, 2017
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
SDMO Industries is hoping its expanded line of rental compact power generators, being unveiled at INTERMAT 2012, will bring commercial success. The R275C3 and R330C3 Rental Compact models will come onto the market after the show, with the R450C3 and R550C3 available from June 2012. It will allow SDMO to offer Rental Compact machines from R16C3 up to R550C3.
Northern Ireland manufacturer Telestack is launching the newest design in the TC range of track mobile conveyors, the TC 421 Automatic Radial. According to Telestack, the TC421 increases safety of sites, facilitates less site traffic movements and improves efficiency of operations.
Northern Ireland manufacturer Telestack is launching the newest design in the TC range of track mobile conveyors, the TC 421 Automatic Radial. According to Telestack, the TC421 increases safety of sites, facilitates less site traffic movements and improves efficiency of operations.
Italian manufacturer Merlo has developed an automatic chassis levelling and stabilisation system for its ROTO range of rotating telescopic handlers. Rather than using individual controls for each stabiliser leg, the operator pushes a button to both level the chassis and stabilise the machine for heavy lifting. This greatly reduces set-up time and increases safety.
