Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
January 6, 2017
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
Hamm has launched the smallest combination roller in the HD CompactLine roller range, the HD10C VT1m.
With a working width of just a metre and weighing 1.5tonnes, the new model is being launched with a permanent all-wheel drive as standard.
Hamm has launched the smallest combination roller in the HD CompactLine roller range, the HD10C VT1m.
With a working width of just a metre and weighing 1.5tonnes, the new model is being launched with a permanent all-wheel drive as standard.
Shantui has continued to expand its European CE-marked equipment line with the introduction of the SF30 fork lift. With a 3tonne lift capacity, the SF30 has an operating weight of 4.5tonnes. Power is provided by a 37kW Isuzu engine. The company offers fork lifts with capacities of 2-3tonnes on single front wheels and 5-10tonnes with twin front wheels. The SF30 is the first model in the line to use a European-specification engine, though additional machines will be added later in the year.
Shantui has continued to expand its European CE-marked equipment line with the introduction of the SF30 fork lift. With a 3tonne lift capacity, the SF30 has an operating weight of 4.5tonnes. Power is provided by a 37kW Isuzu engine. The company offers fork lifts with capacities of 2-3tonnes on single front wheels and 5-10tonnes with twin front wheels. The SF30 is the first model in the line to use a European-specification engine, though additional machines will be added later in the year.
