Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and Bosch Rexroth.
January 6, 2017
Read time: 1 min
Dana Rexroth HVT3, live at INTERMAT 2012
2254 Dana Rexroth’s HVT R3 is a hydro-mechanical variable transmission for wheeled loaders with engine outputs of up to 265kW and is the first power split transmission from the joint venture between Dana and 2253 Bosch Rexroth
Using a combination of hydrostatic and mechanical drives, the technologically advanced three-range transmission can offer up a fuel saving of up to 20% by delivering a stepless speed range from 0-40km/hr without clutches and without interrupting the drive.
Cleverly, the HVT R3 will allow the operator to preset a maximum travel speed, or preselect a fixed engine rpm and use the transmission’s characteristics to keep the engine working at its most fuel-efficient point.
Putzmeister’s new BSC 1409 D self-propelled concrete pump is designed for concreting drilled piles on unfinished surfaces and can deliver up to 85m3/hr at a pressure of up to 71bar. Powered by a 6-cylinder Deutz engine producing 129kW, the BSC 1409 D can travel at a maximum speed of 3.6km and does not need supports to be set up each time it moves.
GA will be introducing a new family of parts at INTERMAT as well as a new range of gaskets. The company makes and sells aftermarket parts for earthmoving machines. It has extended its range to cover Komatsu, Hitachi, Volvo and Liebherr equipment in addition to the parts for Caterpillar machines that it already supplied.
GA will be introducing a new family of parts at INTERMAT as well as a new range of gaskets. The company makes and sells aftermarket parts for earthmoving machines. It has extended its range to cover Komatsu, Hitachi, Volvo and Liebherr equipment in addition to the parts for Caterpillar machines that it already supplied.
Launched just before Intermat 2012, Rivard says the company’s new RIV 503 TR202 wide offset wheeled trencher is beneficial to any large scale power cable and pipe laying project, from water and gas pipe installation to power and fibre optic cable laying.
