Herrenknecht delivers small diameter shaft drilling solution

Herrenknecht has developed a boxhole boring machine (BBM), based on its proven microtunnelling pipe jacking technology. The BBM1100 has been designed to drill slot holes and inclined shafts with a diameter of up to 1.1m and a maximum length of 30m. The machine uses a compact crawler base, with a modular jacking frame, cable drum and power pack that can be positioned separately if required.
January 6, 2017 Read time: 1 min
2592 Herrenknecht has developed a boxhole boring machine (BBM), based on its proven microtunnelling pipe jacking technology.

The BBM1100 has been designed to drill slot holes and inclined shafts with a diameter of up to 1.1m and a maximum length of 30m. The machine uses a compact crawler base, with a modular jacking frame, cable drum and power pack that can be positioned separately if required.

The boring unit is positioned within the jacking frame during transportation. When in position the jacking frame can be aligned up to 30 degrees from vertical. The frame is braced against the ground to provide stability and to transfer the operational thrust and torque loads into the rock. The cutting head is designed for hard rock geologies and is equipped with multiple rows of carbide cutters.

Stand: C3 415/514

www.herrenknecht.de

View more videos
View more stories

For more information on companies in this article

Related Content

  • Perkins completes line-up of four-cylinder engines for Tier IV Final/Stage 4
    January 6, 2017
    Perkins has completed its line-up of four-cylinder engines for Tier 4 Final/Stage IV with the introduction of the 854F-E34TA – the latest in its 800 Series range. The compact, four-cylinder, 3.4litre engine incorporates specially developed SCR technology for the first time. Packaged separately from the DOC module, it can be mounted in either a horizontal or vertical position, giving OEMs of compact machinery greater installation flexibility in the engine bay.
    Read More
  • Perkins completes line-up of four-cylinder engines for Tier IV Final/Stage 4
    April 16, 2013
    Perkins has completed its line-up of four-cylinder engines for Tier 4 Final/Stage IV with the introduction of the 854F-E34TA – the latest in its 800 Series range. The compact, four-cylinder, 3.4litre engine incorporates specially developed SCR technology for the first time. Packaged separately from the DOC module, it can be mounted in either a horizontal or vertical position, giving OEMs of compact machinery greater installation flexibility in the engine bay.
    Read More
  • Mecalac MCR6 fast track excavator joins growing line-up
    February 8, 2013
    French excavator and loader manufacturer Mecalac will launch its MCR6 compact excavator at Bauma. The machine, seen in prototype form at last year’s Intermat show, has a travel speed of up to 10km/h and can be used as both a skid steer loader and an excavator. Built at a new site in Turkey, the MCR6 weighs in at 6 tonnes and is powered by a 55kW (75hp) engine. In excavator mode the machine has a maximum tearout force of 2,400daN and a breakout force of 3,900daN.
    Read More
  • Mecalac MCR6 fast track excavator joins growing line-up
    January 6, 2017
    French excavator and loader manufacturer Mecalac will launch its MCR6 compact excavator at Bauma. The machine, seen in prototype form at last year’s Intermat show, has a travel speed of up to 10km/h and can be used as both a skid steer loader and an excavator. Built at a new site in Turkey, the MCR6 weighs in at 6 tonnes and is powered by a 55kW (75hp) engine. In excavator mode the machine has a maximum tearout force of 2,400daN and a breakout force of 3,900daN.
    Read More

Highlighted Content