Herrenknecht delivers small diameter shaft drilling solution

Herrenknecht has developed a boxhole boring machine (BBM), based on its proven microtunnelling pipe jacking technology. The BBM1100 has been designed to drill slot holes and inclined shafts with a diameter of up to 1.1m and a maximum length of 30m. The machine uses a compact crawler base, with a modular jacking frame, cable drum and power pack that can be positioned separately if required.
January 6, 2017 Read time: 1 min
2592 Herrenknecht has developed a boxhole boring machine (BBM), based on its proven microtunnelling pipe jacking technology.

The BBM1100 has been designed to drill slot holes and inclined shafts with a diameter of up to 1.1m and a maximum length of 30m. The machine uses a compact crawler base, with a modular jacking frame, cable drum and power pack that can be positioned separately if required.

The boring unit is positioned within the jacking frame during transportation. When in position the jacking frame can be aligned up to 30 degrees from vertical. The frame is braced against the ground to provide stability and to transfer the operational thrust and torque loads into the rock. The cutting head is designed for hard rock geologies and is equipped with multiple rows of carbide cutters.

Stand: C3 415/514

www.herrenknecht.de

View more videos
View more stories

For more information on companies in this article

Related Content

  • Leading Edge loader new at show
    January 6, 2017
    The latest addition to the Edge Design range of mobile handling equipment has been released at INTERMAT. The static (SL) / mobile (ML) / tracked (TL) vessel loader is capable of transferring up to 1,200tonnes per hour of material, and can accept it direct from large dumping trucks or tipping trailers. The Edge-Loader TL220 features a conventional belt design and large wide track mounted receiving hopper to facilitate loader filling. It can also be supplied with a discharge conveyor with full 180-degree radi
    Read More
  • Leading Edge loader new at show
    April 19, 2012
    The latest addition to the Edge Design range of mobile handling equipment has been released at INTERMAT. The static (SL) / mobile (ML) / tracked (TL) vessel loader is capable of transferring up to 1,200tonnes per hour of material, and can accept it direct from large dumping trucks or tipping trailers. The Edge-Loader TL220 features a conventional belt design and large wide track mounted receiving hopper to facilitate loader filling. It can also be supplied with a discharge conveyor with full 180-degree radi
    Read More
  • Montabert develops versatile drill for utility machines
    January 6, 2017
    Montabert has designed its novel Micro CPA drilling attachment for use with a number of utility machines such as backhoe loaders, compact excavators, and skid-steer loaders. The firm offers the H22 and H25 variants, which are single-pass drills with a feed rotation of 45° from vertical. They can be used to drill holes with diameters from 25.4mm-44.45mm and 31.75mm-76.2mm respectively, with maximum hole lengths of 6.1m and 9.1m. Both models can be mounted to carriers in the 5-10tonne range.
    Read More
  • Terex introduces micro excavator and two reduced radius minis
    January 6, 2017
    Terex launched three compact excavators at INTERMAT – a micro TC10 and the reduced radius TC15 and TC19. All three have been developed in co-operation with an Italian manufacturer. The TC10, which weighs just 1 tonne, has a travel width of 760mm, allowing it to pass through a standard doorway. Hydraulically extending track frames offer a digging width of 990mm for maximum stability.
    Read More

Highlighted Content