Skip to main content

Hamm launches four new models in HD CompactLine

Hamm is presenting four newly-developed oscillatory rollers at bauma 2013. It means that the roller manufacturer is offering this environment-friendly and cost-effective compaction technology not only for medium and heavyweight tandem rollers and compactors, but also for the successful articulated rollers in the HD CompactLine.
January 6, 2017 Read time: 2 mins
New models in the HAMM HD CompactLine
228 Hamm is presenting four newly-developed oscillatory rollers at bauma 2013.

It means that the roller manufacturer is offering this environment-friendly and cost-effective compaction technology not only for medium and heavyweight tandem rollers and compactors, but also for the successful articulated rollers in the HD CompactLine.

The new range includes the Hamm HD 10C VT combi roller, which makes its debut at bauma.

The smallest combi roller in the CompactLine, with a working width of 1.06m and operating weight of 1.5tonnes, comes with permanent all-wheel drive as standard, in common with the tried and tested HD 8 and HD 10C tandem rollers. This distinguishes it from all other compact rollers in this size and gives it outstanding climbing ability in all situations.

Hamm dominates the compact tandem roller market segment worldwide with the HD CompactLine. Now with a total of 16 models, it is the largest model range in the sub-4.5tonne weight category on the market.

The advantage of oscillation is that it achieves a very fast increase in compaction because the drum’s direct tangential thrusting forces into the material to be compacted while remaining constantly in contact with the ground. The combination of continuously acting static load and changing dynamic shear forces in the material bring about a faster, better and more gentle compaction.

With the construction of oscillatory rollers in this weight class, Hamm is responding to the increasing demands for high-quality compaction even in extremely small areas. Oscillation increases compaction speed and quality.Applications can be found in urban centres for example.

Up to now, tandem rollers have only been able to operate in static mode on narrow construction sites. In future, oscillatory rollers will compact dynamically, on account of the fact that oscillatory compaction does not disturb buildings or pipework below the road surface through vibration. At the same time, a better compaction result is achieved faster.

Stand: F10.1011/1012

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 12717 0 oLinkExternal www.hamm.eu www.hamm.eu false /EasySiteWeb/GatewayLink.aspx?alId=12717 false false%>

For more information on companies in this article

Related Content

  • Volvo introduces trio of short-swing excavators
    April 18, 2013
    Volvo’s launches at bauma included three new excavators with a short swing radius. The ECR25D, ECR58D and ECR88D are designed to be in their element in small, enclosed areas or for working within a single highway lane. They offer digging performance, breakout and tear-out forces and lifting capabilities that rival their larger counterparts, said Volvo. The smallest model, the ECR25D, is particularly easy to take to where it is needed. It can be transported with up to three buckets and a hydraulic breaker on
  • Peri launched UP MDS Formwork at INTERMAT 2012
    January 6, 2017
    Peri is unveiling its new UP MDS shoring tower to all markets outside France at INTERMAT 2012. The shoring tower is equipped with working platforms hanging from the handrails, providing a high level of security during the erection and dismantling phases, and a significantly reduced exposure to musculoskeletal disorders (MSDs). The working platform sets an automatic working position 1m below the handrail and follows the top of the tower. The system improves productivity by optimising weight (total weight of
  • Peri launched UP MDS Formwork at INTERMAT 2012
    February 3, 2012
    Peri is unveiling its new UP MDS shoring tower to all markets outside France at INTERMAT 2012. The shoring tower is equipped with working platforms hanging from the handrails, providing a high level of security during the erection and dismantling phases, and a significantly reduced exposure to musculoskeletal disorders (MSDs). The working platform sets an automatic working position 1m below the handrail and follows the top of the tower. The system improves productivity by optimising weight (total weight of
  • New top-of-the-range wheeled loader from Doosan
    January 31, 2013
    The new generation DL550 wheeled loader from Doosan Infracore is the top-of-the-range model in the company’s updated range of wheel loaders intended for markets in the Middle East and Africa. With a bucket capacity of 5.4m3, the DL550 wheel loader is powered by a 12.7 litre Scania DC13 turbo-charged, air-to-air intercooled diesel engine that meets Tier 2 legislation and suits use in the Middle East and Africa. The engine delivers 294kW at 2100rpm and drives through a new ZF transmission. Other features com