Skip to main content

Hamm launches four new models in HD CompactLine

Hamm is presenting four newly-developed oscillatory rollers at bauma 2013. It means that the roller manufacturer is offering this environment-friendly and cost-effective compaction technology not only for medium and heavyweight tandem rollers and compactors, but also for the successful articulated rollers in the HD CompactLine.
January 6, 2017 Read time: 2 mins
New models in the HAMM HD CompactLine
228 Hamm is presenting four newly-developed oscillatory rollers at bauma 2013.

It means that the roller manufacturer is offering this environment-friendly and cost-effective compaction technology not only for medium and heavyweight tandem rollers and compactors, but also for the successful articulated rollers in the HD CompactLine.

The new range includes the Hamm HD 10C VT combi roller, which makes its debut at bauma.

The smallest combi roller in the CompactLine, with a working width of 1.06m and operating weight of 1.5tonnes, comes with permanent all-wheel drive as standard, in common with the tried and tested HD 8 and HD 10C tandem rollers. This distinguishes it from all other compact rollers in this size and gives it outstanding climbing ability in all situations.

Hamm dominates the compact tandem roller market segment worldwide with the HD CompactLine. Now with a total of 16 models, it is the largest model range in the sub-4.5tonne weight category on the market.

The advantage of oscillation is that it achieves a very fast increase in compaction because the drum’s direct tangential thrusting forces into the material to be compacted while remaining constantly in contact with the ground. The combination of continuously acting static load and changing dynamic shear forces in the material bring about a faster, better and more gentle compaction.

With the construction of oscillatory rollers in this weight class, Hamm is responding to the increasing demands for high-quality compaction even in extremely small areas. Oscillation increases compaction speed and quality.Applications can be found in urban centres for example.

Up to now, tandem rollers have only been able to operate in static mode on narrow construction sites. In future, oscillatory rollers will compact dynamically, on account of the fact that oscillatory compaction does not disturb buildings or pipework below the road surface through vibration. At the same time, a better compaction result is achieved faster.

Stand: F10.1011/1012

%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 12717 0 oLinkExternal www.hamm.eu www.hamm.eu false /EasySiteWeb/GatewayLink.aspx?alId=12717 false false%>

For more information on companies in this article

Related Content

  • New Holland Construction’s new skid steer loaders and tracked loaders offer improved performance
    January 6, 2017
    The new L230 skid-steer loader and C238 compact track loader being launched by New Holland Construction (NHC) at bauma are said to maintain the compact dimensions of their predecessors while delivering more rated operating capacity, more engine and hydraulic power, and more torque. The models are also said to offer best-in-class dump height and reach with New Holland’s patented SuperBoom. Replacing the L225 and C232, the L230 and C238 feature a 67kW turbocharged Stage IIIA engine, said to enable it to compe
  • New Holland Construction’s new skid steer loaders and tracked loaders offer improved performance
    February 12, 2013
    The new L230 skid-steer loader and C238 compact track loader being launched by New Holland Construction (NHC) at bauma are said to maintain the compact dimensions of their predecessors while delivering more rated operating capacity, more engine and hydraulic power, and more torque. The models are also said to offer best-in-class dump height and reach with New Holland’s patented SuperBoom. Replacing the L225 and C232, the L230 and C238 feature a 67kW turbocharged Stage IIIA engine, said to enable it to compe
  • FRD adds crushers and shears to demolition attachment range
    January 6, 2017
    Furukawa Rock Drill (FRD) is extending its hydraulic attachment line-up with additional V Series jaw crushers and shears. The company has extended its VM Series of rotating crushers from two to seven models, now suitable for excavators of 12-100 tonnes operating weight. In addition FRD will offer the VS Series of secondary demolition crushers for 11-50 tonne excavators, along with the VR Series of steel cutters with both fixed and rotating heads, which can be both boom or dipper stick mounted.
  • FRD adds crushers and shears to demolition attachment range
    February 7, 2013
    Furukawa Rock Drill (FRD) is extending its hydraulic attachment line-up with additional V Series jaw crushers and shears. The company has extended its VM Series of rotating crushers from two to seven models, now suitable for excavators of 12-100 tonnes operating weight. In addition FRD will offer the VS Series of secondary demolition crushers for 11-50 tonne excavators, along with the VR Series of steel cutters with both fixed and rotating heads, which can be both boom or dipper stick mounted.